track video of my 71C10 turbo 6.0L

[Benlugchev]

stock bottom end lq4 made 738/700tq

here is few videos from the track

http://youtu.be/9Kto_i38r8s

[Benlugchev]

c10 track - YouTube

[Super73]

Lots of mph... no reason it can't go low 10's with a verter swap or just plain better 60'

[BR3W CITY]

Is that supposed to be 12psi? Sounds like WAY more than the "2 psi" the top of the vid says.

thing rips tho

[Wasted Income]

Less hippie music, more spooly noises!!

LOL@ getting kicked off the track at the end. Nice work.

Originally Posted by BR3W CITY

Sounds like WAY more than the "2 psi" the top of the vid says.

lol

[BR3W CITY]

Originally Posted by Wasted Income

Less hippie music, more spooly noises!!

LOL@ getting kicked off the track at the end. Nice work.



lol

Maybe I need to put the down...did I miss something?

[NEWFISHER]

Originally Posted by BR3W CITY

Maybe I need to put the down...did I miss something?

3.25 " you are goin' home" after asking for another run

[Benlugchev]

Originally Posted by Wasted Income

Less hippie music, more spooly noises!!

LOL@ getting kicked off the track at the end. Nice work.



lol

Hey "wasted income" dude.... small world....My buddy nater Leman just show me a few pics of your blaze yesterday. Looks awesome nice job.

[cableguy0]

Nice setup. You can definitely knock off at least 1/2 second with that mph especially if you can get up on boost before launch.

[Wasted Income]

Originally Posted by Benlugchev

Hey "wasted income" dude.... small world....My buddy nater Leman just show me a few pics of your blaze yesterday. Looks awesome nice job.

Haha...jeez I guess it is a small world. How do you know Nater?

Originally Posted by Benlugchev

I had the lightest tial spring in the gate (5lb) boost was very inconsistent 5lb to 15lbs during the passes. Im adding another waste gate and I'm looking at doing a mod to allow me to manually force the 80e into 3rd by grounding the solenoid then interrupting the ground to launch in 1st. Forcing the 80e into 3rd I will hopefully be able to make a lot more boost on the foot brake@ launch. Basically making a "farmers transbrake".

I ran into similar problems with my old setup last year. I just had one 46 mm Precision gate, and with the 7 psi spring in it, it would settle out at around 15 psi...lol. I changed the orientation of the gate a bit, and moved up to a 60 mm Turbosmart gate, and it's better, but still not perfect. 7 lb spring settles out around 9-10 psi....but that's livable.

I've seen the hillbilly transbrake via Denmah on 'Tech. Never tried it though, as my hydroboost and 2 step let me build more than enough to shred the Mickeys from a dig. Bigger front tires might let you hold it more before it pushes?

Originally Posted by Benlugchev

And yes all they allow 3 passes under 11.50' before getting the boot. (No cage)

That's pretty generous! Our local track...you run too fast...you're gone.

[Benlugchev]

Originally Posted by Wasted Income

Haha...jeez I guess it is a small world. How do you know Nater?

His bro, clint, married my cousin maria... Nater was out here on the east coast visiting last weekend when he was telling me about your rig.



I ran into similar problems with my old setup last year. I just had one 46 mm Precision gate, and with the 7 psi spring in it, it would settle out at around 15 psi...lol. I changed the orientation of the gate a bit, and moved up to a 60 mm Turbosmart gate, and it's better, but still not perfect. 7 lb spring settles out around 9-10 psi....but that's livable.

Im going to add in a second gate, did you like the turbosmart progate-50, thats what im looking at getting?

I've seen the hillbilly transbrake via Denmah on 'Tech. Never tried it though, as my hydroboost and 2 step let me build more than enough to shred the Mickeys from a dig. Bigger front tires might let you hold it more before it pushes?

my cousin just did it to his turbo ls 88' Notch Stang. He says its pretty easy to wire. Ill give it a whirl this weekend

That's pretty generous! Our local track...you run too fast...you're gone.

Its not to say they are happy with me after 3 passes under 11.50s but thats their cutoff point when the cut your wrist band off and say ....scat!

[Custom 68]

I am guessing he means he footbrakes it to 2 psi? But yea don't know what is full boost is?

[slowcpe]

I was wondering about the 2psi bit too. Nice setup.

[Benlugchev]

Yea launching at 2psi off the foot brake. I had the lightest tial spring in the gate (5lb) boost was very inconsistent 5lb to 15lbs during the passes. Im adding another waste gate and I'm looking at doing a mod to allow me to manually force the 80e into 3rd by grounding the solenoid then interrupting the ground to launch in 1st. Forcing the 80e into 3rd I will hopefully be able to make a lot more boost on the foot brake@ launch. Basically making a "farmers transbrake".

Will be back at the track in 2 weeks for another test and tune to push it a little harder.

And yes all they allow 3 passes under 11.50' before getting the boot. (No cage)

[BR3W CITY]

12 bolt rears are better than many people give credit, since the "go big or go home" answer will ALWAYS be a custom 9".

In a drag car, an 8.8 or 9" has advantages, not in the least being the quick change gear sets.

A 12 bolt however is a fine trans for most folks. Its fairly beefy from a build standpoint, unlike the 10bolt. The c clips will always be an issue. I have a set of good axles in mine, and that takes a big chunk of the worry out right away. I'm still concerned about grenading the whole carrier or something, but not on the stree.

[Super73]

I recently moved to a 9" but 1.43 60's spinning on the 100 hit, well I think the truck 12 bolt was on borrowed time with the full N20 kit. It had moser axles, C-clip eliminators, auburn posi.

I think a properly built truck 12 bolt could live at mid/low 1.5 60's..

[Benlugchev]

Originally Posted by Super73

I recently moved to a 9" but 1.43 60's spinning on the 100 hit, well I think the truck 12 bolt was on borrowed time with the full N20 kit. It had moser axles, C-clip eliminators, auburn posi.

I think a properly built truck 12 bolt could live at mid/low 1.5 60's..

It's a stock12 bolt with moser axles and a mini spool. No issues so far. It's been about 2 years with this power. The 80e is a lot easier on the rear than the Muncie was.

[low69chevy]

Originally Posted by Benlugchev

It's a stock12 bolt with moser axles and a mini spool. No issues so far. It's been about 2 years with this power. The 80e is a lot easier on the rear than the Muncie was.

Yeah I saw the vid of your truck when it was manual and yeah it looked harsh when you floored it.

Thanks everyone for the info on the 12 bolt everyone who replied seem to have good built trucks ive read most of your builds and learned alot.

[Wasted Income]

I too have been putting 700+ whp through my 12 bolt for the past couple years, and 500+ for the 3-4 years before that, all of them on a drag radial. It's bone stock with the exception of a chromoly 1350 yoke, and an Auburn posi. Even has the stamped steel cover.

I have a feeeling it is next to let loose...but it certainly doesn't owe me anything at this point, and I agree with Brew City that it's a lot stronger than people will have you believe.

[RatPwrd72]

I'm running a car 12 bolt with Mark Williams spool and axles on a big slick (32x14x15). Truck weighs 3900 race weight w/driver and turn 1.40 60' times like clockwork off the footbrake.

12 bolt rear ends will definitely take the abuse and cost less HP to spin than a 9" Ford. Only advantage to the Ford rear swap might be availability of parts or second hand pieces.

[Benlugchev]

after some more fine tuning and addition of the 3rd gear 80e mod. my rig went 10.1@133mph. 60'@1.54. Launching on the foot brake @10#, then full boost 17#

Ran 3 solid 1/8 mile passes all at 6.6 or 6.7 @107..then slamming the brakes
Only got to run this 1 10.1 pass out the back door this time before getting my wrist band cut...again

new video coming.
here is the slip#695

[low69chevy]

Nice times pm sent

[Benlugchev]

Video From yesterday
http://youtu.be/Wsn0bjM2tdM

[Benlugchev]

Originally Posted by Benlugchev

Video From yesterday
http://youtu.be/tgkZoeGOm8I

edit

[Wasted Income]

Hot damn! Nice work.