My wife's 2WD Blazer pics... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 08-14-2003, 09:38 PM

We did a full off frame resto on this truck. Used all GM parts including new doors, fenders, hood, trim, bezels, dash, all interior, wing windows, hood hinges, trim, everything.

Lowered 5 1/2 in front, 5 in back. 7 and 8 inch rallys. All new chrome. Nice 350, Pheonix transmission, rebuilt the rear end, suspension, body mounts, on and on.

We did all the work except paying glass man to install a windshield, and Pheonix transmissions to build the tranny.

New GM dash pad, door panel, dash bezels, door panel trim, window regulators, door hinges. Sculpted tweed by my wife. Nice stereo.

Wound up with about 7000 dollars worth of new GM parts in it. I get dealer cost on the parts, which is 10% less than any shop or customer pays, or about 45-50% off normal price. That should give you an idea of how many new parts we used. All the reciepts stack up about three inches tall. We have about 10 thousand in it total and two years of very intense work.

*rage'nrat638* · 08-14-2003, 09:40 PM

kool......looks good

Tx Firefighter · 08-14-2003, 09:41 PM

Lots of expensive parts inside the tailgate of one of these things. Regulators and tracks are high. We wound up spending so much money on the top weatherstripping that we're afraid to ever take the top off and risk causing a leak.

Tx Firefighter · 08-14-2003, 09:43 PM

The billet grille makes the pictures look funny.

PHOENIX · 08-14-2003, 09:44 PM

Any more pictures?

Tx Firefighter · 08-14-2003, 09:46 PM

Sculpted tweed interior. Tweed covered console. Nice headliner. Handmade carpet, because the out of the box stuff fit like crap. Handmade billet on the console.

Tx Firefighter · 08-14-2003, 09:48 PM

Interior pic. Notice the sculpted tweed on the rear side panels. It's kind of subtle in the pictures, but looks great in person.

Tx Firefighter · 08-14-2003, 09:53 PM

I've got to fix a couple of small things on it. Speedo needs recalibrating and it needs a good detail job, then we probably will sell it. She hasn't driven it in two years, it just sets around. I hate to see it go to waste. We are always afraid to drive it anywhere for fear that some knucklehead will hit it or steal it.

That's why we're back to fixing up junk for fun, instead of restoring them fully.

**N2TRUX** · 08-14-2003, 09:58 PM

Veeeery nice Blazer. It is obvious there is a ton of work done. What's the rest of it look like? I want to see under the hood, and more interior shots...

Tx Firefighter · 08-14-2003, 10:07 PM

Door panel. New GM panel, new "cup" behind handle, new pull straps and end caps. She made the carpeted sections on the bottom and re-used the original strips. She also made the map pockets, so they would match exactly. Note sculpted tweed insert too. Did I mention that my wife does upholstery. She painted it too.

Tx Firefighter · 08-14-2003, 10:10 PM

New GM dash pad, instrument bezel, all new A/C vents, blah, blah, blah.....you get the picture I'm sure. Of note though, the steering wheel was a 20 dollar swap meet find.

Tx Firefighter · 08-14-2003, 10:12 PM

Nother shot of the dash

Tx Firefighter · 08-14-2003, 10:15 PM

Custom covered headliner, with perforated vinyl. She made the sunvisors too, so they would match exactly. Actually, we used the stock sunvisor rods, and made new panels, covered them, and sewed them.

bigblock73 · 08-14-2003, 10:15 PM

veeeery nice looking Blazer...awesome!

more pics, maybe of the engine?

-Jeff

Tx Firefighter · 08-14-2003, 10:21 PM

Another outside pic and I'm done. No pictures of the engine right now. I'll get some though. I told her to take pictures of her Blazer, but she didn't figure anybody would want to see a 350 for cryin out loud. It's just a Goodwrench with Edelbrock intake and carb, and a little dress up. The engine compartment is painted and detailed pretty good though.

BaggedC10 · 08-14-2003, 10:35 PM

Very nice and I like the Rally wheels!

Driving them is the best part!

**N2TRUX** · 08-14-2003, 10:37 PM

So whatcha askin for it?????

Jonboy · 08-14-2003, 11:10 PM

that truck looks verrrry nice. Does she do uphulstery work at a shop, or just a hobby?

Tx Firefighter · 08-14-2003, 11:18 PM

She does the upholstery here at the house. We have a little girl that she's raising. Her full time job is running a company, the upholstery thing is sideline.

We got into upholstery because everyone around here does s-h-i-t-t-y work. The machine cost 1400 dollars and paid for itself in a month or two.

That red and white stripe thing is her tuck and roll stool. It looks like a beach ball or something in the pic.

Slonaker · 08-14-2003, 11:30 PM

That is my dream Blazer. <faints>

Slonaker

**old Rusty C10** · 08-15-2003, 12:20 AM

really nice ride love that interior

ItsNotABlazer · 08-15-2003, 09:58 AM

If she does interior work for the public I might be making a drive down to Weatherford. :p

Very nice looking Blazer.

I am sure it will sell quickly if and when that time comes.

Brad

LOHRTBT · 08-15-2003, 10:15 AM

Damn!! Very clean! I would love to own that!

mjsmith1223 · 08-15-2003, 10:47 AM

Very nice restoration. You all did some fantastic work.

Mike
Grand Haven, MI

beaterC10 · 08-15-2003, 10:59 AM

I like that stance.

Not to sidetrack the thread, but what combination of parts did you use in the front? 3" spindles + 2.5" springs or 2.5"spindles +3" springs.

I have a set of 3" spindles to install and was wondering what is required to make Ralleys fit.

08-14-2003, 09:38 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	My wife's 2WD Blazer pics... We did a full off frame resto on this truck. Used all GM parts including new doors, fenders, hood, trim, bezels, dash, all interior, wing windows, hood hinges, trim, everything. Lowered 5 1/2 in front, 5 in back. 7 and 8 inch rallys. All new chrome. Nice 350, Pheonix transmission, rebuilt the rear end, suspension, body mounts, on and on. We did all the work except paying glass man to install a windshield, and Pheonix transmissions to build the tranny. New GM dash pad, door panel, dash bezels, door panel trim, window regulators, door hinges. Sculpted tweed by my wife. Nice stereo. Wound up with about 7000 dollars worth of new GM parts in it. I get dealer cost on the parts, which is 10% less than any shop or customer pays, or about 45-50% off normal price. That should give you an idea of how many new parts we used. All the reciepts stack up about three inches tall. We have about 10 thousand in it total and two years of very intense work. __________________ I'm on the Instagram- @Gearhead_Kevin

08-14-2003, 09:41 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Lots of expensive parts inside the tailgate of one of these things. Regulators and tracks are high. We wound up spending so much money on the top weatherstripping that we're afraid to ever take the top off and risk causing a leak. __________________ I'm on the Instagram- @Gearhead_Kevin

08-14-2003, 09:43 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	The billet grille makes the pictures look funny. __________________ I'm on the Instagram- @Gearhead_Kevin

08-14-2003, 09:44 PM	#5
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Any more pictures? __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

08-14-2003, 09:46 PM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Sculpted tweed interior. Tweed covered console. Nice headliner. Handmade carpet, because the out of the box stuff fit like crap. Handmade billet on the console. __________________ I'm on the Instagram- @Gearhead_Kevin

08-14-2003, 09:40 PM	#2
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	kool......looks good

08-14-2003, 09:48 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Interior pic. Notice the sculpted tweed on the rear side panels. It's kind of subtle in the pictures, but looks great in person. __________________ I'm on the Instagram- @Gearhead_Kevin

08-14-2003, 09:53 PM	#8
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I've got to fix a couple of small things on it. Speedo needs recalibrating and it needs a good detail job, then we probably will sell it. She hasn't driven it in two years, it just sets around. I hate to see it go to waste. We are always afraid to drive it anywhere for fear that some knucklehead will hit it or steal it. That's why we're back to fixing up junk for fun, instead of restoring them fully. __________________ I'm on the Instagram- @Gearhead_Kevin

08-14-2003, 09:58 PM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Veeeery nice Blazer. It is obvious there is a ton of work done. What's the rest of it look like? I want to see under the hood, and more interior shots...

08-14-2003, 10:07 PM	#10
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Alright... Door panel. New GM panel, new "cup" behind handle, new pull straps and end caps. She made the carpeted sections on the bottom and re-used the original strips. She also made the map pockets, so they would match exactly. Note sculpted tweed insert too. Did I mention that my wife does upholstery. She painted it too. __________________ I'm on the Instagram- @Gearhead_Kevin

08-14-2003, 10:10 PM	#11
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	New GM dash pad, instrument bezel, all new A/C vents, blah, blah, blah.....you get the picture I'm sure. Of note though, the steering wheel was a 20 dollar swap meet find. __________________ I'm on the Instagram- @Gearhead_Kevin

08-14-2003, 10:12 PM	#12
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Nother shot of the dash __________________ I'm on the Instagram- @Gearhead_Kevin

08-14-2003, 10:15 PM	#13
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Custom covered headliner, with perforated vinyl. She made the sunvisors too, so they would match exactly. Actually, we used the stock sunvisor rods, and made new panels, covered them, and sewed them. __________________ I'm on the Instagram- @Gearhead_Kevin

08-14-2003, 10:15 PM	#14
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	veeeery nice looking Blazer...awesome! more pics, maybe of the engine? -Jeff

08-14-2003, 10:21 PM	#15
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Another outside pic and I'm done. No pictures of the engine right now. I'll get some though. I told her to take pictures of her Blazer, but she didn't figure anybody would want to see a 350 for cryin out loud. It's just a Goodwrench with Edelbrock intake and carb, and a little dress up. The engine compartment is painted and detailed pretty good though. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

08-14-2003, 10:35 PM	#16
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Very nice and I like the Rally wheels! Driving them is the best part! __________________ 2001 Silverado bagged on 22's. Sold

08-14-2003, 10:37 PM	#17
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	So whatcha askin for it????? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-14-2003, 11:10 PM	#18
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	that truck looks verrrry nice. Does she do uphulstery work at a shop, or just a hobby? __________________ 1974 Jimmy- 5.3/4L80e/NP241

08-14-2003, 11:18 PM	#19
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	She does the upholstery here at the house. We have a little girl that she's raising. Her full time job is running a company, the upholstery thing is sideline. We got into upholstery because everyone around here does s-h-i-t-t-y work. The machine cost 1400 dollars and paid for itself in a month or two. That red and white stripe thing is her tuck and roll stool. It looks like a beach ball or something in the pic. __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 08-14-2003 at 11:20 PM.

08-14-2003, 11:30 PM	#20
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	That is my dream Blazer. <faints> Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

08-15-2003, 12:20 AM	#21
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	really nice ride love that interior __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-15-2003, 09:58 AM	#22
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	If she does interior work for the public I might be making a drive down to Weatherford. :p Very nice looking Blazer. I am sure it will sell quickly if and when that time comes. Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

08-15-2003, 10:15 AM	#23
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Damn!! Very clean! I would love to own that! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

08-15-2003, 10:47 AM	#24
mjsmith1223 Registered User Join Date: Aug 2003 Location: Michigan Posts: 94	Very nice restoration. You all did some fantastic work. Mike Grand Haven, MI

08-15-2003, 10:59 AM	#25
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	I like that stance. Not to sidetrack the thread, but what combination of parts did you use in the front? 3" spindles + 2.5" springs or 2.5"spindles +3" springs. I have a set of 3" spindles to install and was wondering what is required to make Ralleys fit.

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode