bagged trucks and setting up a 2 piece driveline for drop - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NEWFISHER · 10-23-2014, 12:14 AM

Anything I should look out for? Pinion angle set at +- 2 degrees of carrier bearing or trans output? Getting things ready for a long weekend of welding , cutting and grinding.
Thanks

**TBONE1964** · 10-23-2014, 01:06 AM

Quote:

Originally Posted by NEWFISHER

Anything I should look out for? Pinion angle set at +- 2 degrees of carrier bearing or trans output? Getting things ready for a long weekend of welding , cutting and grinding.
Thanks

Do you have an inclinometer Jon? Keep the u joint working angles between 1/2 and 3 degrees for optimum performance and no vibration.

I am open on Sunday if you need a hand working on it. Let me know

Take care,
Tom

NEWFISHER · 10-23-2014, 10:08 AM

Thanks Tom. I will get ahold of you.
I kinda suspected keeping the working angles at 3 betwen trans....carrier...diff. Im oy concearned at ride height to full drop and ability to drive in and out of the parking lots.

Anyone ever use a CV or Carrdan style joint set up at the front of the driveline on a dropped truck?

NEWFISHER · 10-23-2014, 10:11 AM

Thanks Tom. I will get ahold of you.
I kinda suspected keeping the working angles at 3 betwen trans....carrier...diff. Im oy concearned at ride height to full drop and ability to drive in and out of the parking lots.

Anyone ever use a CV or Carrdan style joint set up at the front of the driveline on a dropped truck?

10-23-2014, 12:14 AM	#1
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	bagged trucks and setting up a 2 piece driveline for drop Anything I should look out for? Pinion angle set at +- 2 degrees of carrier bearing or trans output? Getting things ready for a long weekend of welding , cutting and grinding. Thanks __________________ GOD BLESS AMERICA!

10-23-2014, 10:08 AM	#3
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: bagged trucks and setting up a 2 piece driveline for drop Thanks Tom. I will get ahold of you. I kinda suspected keeping the working angles at 3 betwen trans....carrier...diff. Im oy concearned at ride height to full drop and ability to drive in and out of the parking lots. Anyone ever use a CV or Carrdan style joint set up at the front of the driveline on a dropped truck? __________________ GOD BLESS AMERICA!

10-23-2014, 10:11 AM	#4
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: bagged trucks and setting up a 2 piece driveline for drop Thanks Tom. I will get ahold of you. I kinda suspected keeping the working angles at 3 betwen trans....carrier...diff. Im oy concearned at ride height to full drop and ability to drive in and out of the parking lots. Anyone ever use a CV or Carrdan style joint set up at the front of the driveline on a dropped truck? __________________ GOD BLESS AMERICA!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.