What's behind your seat..?

[IdahoMan]

Hi all!

The following is a thread that I made on another 73-87 truck forum here: http://forum.73-87chevytrucks.com/sm...6515#msg246515
(Check out the CUCV M1028)

I'm still looking for some inspiration. Saw a nice custom wood shelving mod by poster "tucsonjwt" here: http://67-72chevytrucks.com/vboard/s...4&postcount=30
tucsonjwt, did you follow a template for that?

-----------

Looking for ideas for organizing the area of the cab behind the seat. Looking for your input on what to have, how to store/install it. Anyone seen a truck of our kind that has been used in a military/police/security/fire capacity? I'd imagine they'd have a sturdy setup for equipment.

Rough Ideas:

Items:
Flash Light
Fire Extinguisher
Firearm
Med Kit
Trash Container
Tools
Ice-Scraper/Squeegee
Oil/Trans Fluid

Interior Body:
OEM Panelboard (what I have now)
Caged/Custom

Mods:
12V Cig Socket
USB Power Socket
Custom wired holster for LED FL charging
Rifle Rack
FE bracket
Small Safe

So, what's behind your seat? What's your setup? Any pics?
Where do things attach, weld, wire or screw into, and what's the proper way of going about it?

-----------

Mine (Panelboard not in at the moment):



Sincerely,
IdahoMan

[gchemist]

One big box with two 12" competiton woofers. Both powered by a nice stainless steel amp. Eardrum busters even with the windows rolled down!

[Tucson38]

HiLift Jack, heavy down jacket, 4-way lug wrench.

[meatwagon83]

this, 2 6x9s and a 10 inch sub

[xole]

2 6x9's, power slider motor, rifle rack.

[epon]

[Bears63]

The way my adventure has been going probably another huge mouse nest and more poop and urine! I'll find out for certain tomorrow night.

[tucsonjwt]

No template - just measured with the seat all the way back - so no rubbing anywhere. I used 3 self tapping sheet metal screws in the lip under the window in the vertical recess spaces so the short screws would not penetrate the back wall of the cap - plenty secure. The custom cab corner speaker boxes were also very handy and no cost to build using scraps I had available.

My best advice - lay out everything you want to store and then design a storage bin to accommodate each item. Store most frequently used items on top and outer cubbies.

This is basically just a big open front triangle with a 1/4" plywood back and 1Xs and other plywood pieces for the shelves and dividers. If might be a good idea to just use cheap plywood or MDF or even OSB if you are undecided on what you want so you don't waste expensive stock. Actually, nobody will see it back there so cheap stock is probably the most practical option.

[tucsonjwt]

Some recent pics with storage utilization.

[Dead Parrot]

Bought this behind the seat shelf setup many years ago. I think it is a Rubbermaid product. Found it at Pepboys. Cut some carpet pieces to line the bottoms of the shelf areas to cut down on rattles.

[riz]

Dee Zee Inc. #CO75 around $90.

RIZ

[IdahoMan]

Originally Posted by Dead Parrot

Bought this behind the seat shelf setup many years ago. I think it is a Rubbermaid product. Found it at Pepboys. Cut some carpet pieces to line the bottoms of the shelf areas to cut down on rattles.

DP,

Is that a Halon 1211 Extinguisher you have there? I'm thinking of getting one fo those.


IM

[Sodak]

thanks just ordered that.

[wilkin250r]

This is the best one I've seen. It's more speaker-oriented, but the concept can be adapted to anything. If this was his first attempt at fiberglass, maybe results like this really are attainable by the average Joe.

http://67-72chevytrucks.com/vboard/s...ght=fiberglass

[TexasJeff]

Here is another thread of the same subject.

http://67-72chevytrucks.com/vboard/s...d.php?t=518611