|
11-20-2014, 06:34 AM | #1 |
Registered User
Join Date: Jun 2012
Location: west mi.
Posts: 91
|
Defrost
Heat question.
My heater shifts from heat to defrost but does not completely shift. I only shifts about 50%. Any thoughts? Thanks |
11-20-2014, 12:50 PM | #2 |
Registered User
Join Date: Dec 2006
Location: Yakima, WA
Posts: 325
|
Re: Defrost
Good Morning, If you mean the lever on the control only moves half way? You could check to see if the cable is long enough, maybe bent or binding. There could be an obstruction in the heater box not allowing the door to fully move or it could be hanging up due to corrosion. Good luck.
God Bless, terry |
11-20-2014, 06:48 PM | #3 |
Registered User
Join Date: Jun 2012
Location: west mi.
Posts: 91
|
Re: Defrost
This is a air truck with vacuum controls.
It is getting vacuum but is not moving full stroke. Any one have any pic's of that part of the system? thanks |
11-21-2014, 10:00 AM | #4 |
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Defrost
Hi does it quit blowing elsewhere?
If not it could be this flap/door. or there is a spot on the floor/defrost actuators to make it stay some up or down I put it in the middle hole,all up or all down
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
11-21-2014, 04:18 PM | #5 |
Registered User
Join Date: Jun 2012
Location: west mi.
Posts: 91
|
Re: Defrost
Every thing seems to work as it should except the door that sends
the air from the floor to the defrost does not close all the way. That leaves half the air going to the defrost and half to the floor. |
11-22-2014, 09:13 PM | #6 |
Registered User
Join Date: Jun 2012
Location: west mi.
Posts: 91
|
Re: Defrost
Any thoughts on why this would happen?^
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|