|
|
|
11-20-2014, 08:32 PM
|
#1 |
|
Active Member
 Join Date: Jan 2011
Location: columbia, SC
Posts: 156
|
72 Blazer frame tails
How far do the frame tails hang out from the rear body cross support.Last owner cut them off , i have replacement ones but don't know measurement .A picture and a measurement from a specific point would be great. Thanks
|
|
|
|
12-07-2014, 11:27 PM
|
#2 |
|
Registered User
Join Date: Mar 2014
Location: Orange, CA
Posts: 105
|
Re: 72 Blazer frame tails
They stick out approx. 1.5" beyond the rear body panel below the tail gate. I know because I had to extend mine due to being cut off. I added about 1.25" and my rear bumper is too close to the body.
I have about 1/8 inch to spare between the bumper and quarter panels. I would have liked to have a little more room but it wasn't worth the effort to relocate the holes. If you have the tails you could mount them to your bumper/brackets and then align the bumper to the body at a point that you find acceptable, weld them and call it good.
__________________
Don aka Rocket_Man 72 K5 Blazer 454 CI 2002 Honda VTX 1800C |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
