Thermostat housings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**shadow1967** · 01-10-2015, 03:37 PM

I need a 90 degree housing for better hose angle. I have a ls engine and was wondering if sbc are the same?

H20cooled · 01-10-2015, 04:55 PM

They are different. What about one of these, the straight ones I would think would work great. http://www.jegs.com/p/CSR/CSR-360-De...56559/10002/-1

BR3W CITY · 01-10-2015, 07:23 PM

You can use something like posted above, you can try the GenV camaro pump, or you can bend stainless tube to make the angle then cut the hose to match.

01-10-2015, 03:37 PM	#1
shadow1967 Senior Member Join Date: Jul 2011 Location: Hawthorne, CA Posts: 458	Thermostat housings I need a 90 degree housing for better hose angle. I have a ls engine and was wondering if sbc are the same? __________________ Build for my 1959 Fleetside... http://67-72chevytrucks.com/vboard/s...d.php?t=518308

01-10-2015, 04:55 PM	#2
H20cooled Registered User Join Date: Sep 2014 Location: Milwaukie, OR Posts: 223	Re: Thermostat housings They are different. What about one of these, the straight ones I would think would work great. http://www.jegs.com/p/CSR/CSR-360-De...56559/10002/-1

01-10-2015, 07:23 PM	#3
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Thermostat housings You can use something like posted above, you can try the GenV camaro pump, or you can bend stainless tube to make the angle then cut the hose to match. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.