1980 Grille Guard on 1982 Bumper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Eraser475 · 01-20-2015, 06:09 PM

I just got a Luvurne grille guard off of a 1980 Chevy for free. The contour of the bumper is different than mine and I was wondering what the best way to make it fit would be. am I going to have to cut a new contour out of the uprights? Thanks

86c20 · 01-20-2015, 10:52 PM

could try rubber as a filler and longer bolts?? if you are just for show it could work. not right but work or make an adp. adn use that?

**special-K** · 01-20-2015, 11:00 PM

Yep, cut the contour of the newer bumper into it. The frame is the same, so no issues there.

Eraser475 · 01-21-2015, 01:26 AM

The holes should all line up then?

DBLSPRT68 · 01-21-2015, 06:37 AM

The mounting holes should be the same, but the Contour is different. Make a cardboard templet of the 82 bumper (where it mounts), and then trace the outline on the guard. trim off areas not needed. Mount up on the 82.

Eraser475 · 01-21-2015, 09:01 AM

Alright, thanks guys!

Eraser475 · 01-22-2015, 02:19 AM

Any suggestions on the best way to cut it would be? I'm thinking torch, but I'd just like some cleaner ideas if possible

Rubble · 01-22-2015, 09:41 AM

Do you have room for a 4" grinder with zip wheel?, they make a nice clean cut.

Eraser475 · 01-22-2015, 10:05 AM

Quote:

Originally Posted by Rubble

Do you have room for a 4" grinder with zip wheel?, they make a nice clean cut.

I do, but i don't know if that would be able to follow the curves without too much extra damage

01-20-2015, 06:09 PM	#1
Eraser475 Registered User Join Date: Mar 2014 Location: Echo, MN Posts: 107	1980 Grille Guard on 1982 Bumper I just got a Luvurne grille guard off of a 1980 Chevy for free. The contour of the bumper is different than mine and I was wondering what the best way to make it fit would be. am I going to have to cut a new contour out of the uprights? Thanks __________________ Dad's: 1973 Chevy C-60 Grain Truck 366 Big Block Dad's: 1982 Chevy Silverado 6.2L Diesel K-10 Dad's: 1987 Chevy Silverado TBI 350 R-10 Dad's: 2007 GMC Sierra Classic 2500HD SLT Mine: 1982 Chevy Silverado 6.2L Diesel K-10

01-20-2015, 10:52 PM	#2
86c20 Registered User Join Date: Mar 2012 Location: edgartown mass Posts: 852	Re: 1980 Grille Guard on 1982 Bumper could try rubber as a filler and longer bolts?? if you are just for show it could work. not right but work or make an adp. adn use that? __________________ 1986 c20 "the hillbilly" 350 sm465 3.42gears 21mpg at 70mph 1985 k30 "the ice cream truck from hell" no rust az truck 197-8??? c30 "ramp truck" 454 1978 monte carlo 350 350th with 2.73 gears. no rust. sc car

01-20-2015, 11:00 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1980 Grille Guard on 1982 Bumper Yep, cut the contour of the newer bumper into it. The frame is the same, so no issues there. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-21-2015, 01:26 AM	#4
Eraser475 Registered User Join Date: Mar 2014 Location: Echo, MN Posts: 107	Re: 1980 Grille Guard on 1982 Bumper The holes should all line up then? __________________ Dad's: 1973 Chevy C-60 Grain Truck 366 Big Block Dad's: 1982 Chevy Silverado 6.2L Diesel K-10 Dad's: 1987 Chevy Silverado TBI 350 R-10 Dad's: 2007 GMC Sierra Classic 2500HD SLT Mine: 1982 Chevy Silverado 6.2L Diesel K-10

01-21-2015, 06:37 AM	#5
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Re: 1980 Grille Guard on 1982 Bumper The mounting holes should be the same, but the Contour is different. Make a cardboard templet of the 82 bumper (where it mounts), and then trace the outline on the guard. trim off areas not needed. Mount up on the 82. __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

01-21-2015, 09:01 AM	#6
Eraser475 Registered User Join Date: Mar 2014 Location: Echo, MN Posts: 107	Re: 1980 Grille Guard on 1982 Bumper Alright, thanks guys! __________________ Dad's: 1973 Chevy C-60 Grain Truck 366 Big Block Dad's: 1982 Chevy Silverado 6.2L Diesel K-10 Dad's: 1987 Chevy Silverado TBI 350 R-10 Dad's: 2007 GMC Sierra Classic 2500HD SLT Mine: 1982 Chevy Silverado 6.2L Diesel K-10

01-22-2015, 02:19 AM	#7
Eraser475 Registered User Join Date: Mar 2014 Location: Echo, MN Posts: 107	Re: 1980 Grille Guard on 1982 Bumper Any suggestions on the best way to cut it would be? I'm thinking torch, but I'd just like some cleaner ideas if possible __________________ Dad's: 1973 Chevy C-60 Grain Truck 366 Big Block Dad's: 1982 Chevy Silverado 6.2L Diesel K-10 Dad's: 1987 Chevy Silverado TBI 350 R-10 Dad's: 2007 GMC Sierra Classic 2500HD SLT Mine: 1982 Chevy Silverado 6.2L Diesel K-10

01-22-2015, 09:41 AM	#8
Rubble Registered User Join Date: Feb 2012 Location: Big Valley. Alberta Posts: 674	Re: 1980 Grille Guard on 1982 Bumper Do you have room for a 4" grinder with zip wheel?, they make a nice clean cut. __________________ 1977 Chev C30 454/465/14ff DRW 1974 Chev C20.350/465/14ff " Rock n Roll ain't noise pollution"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.