PA Carpet strips - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 03-08-2015, 08:59 PM

Carpet strips rear one has pitting on both ends and front one has a couple of dents, bowed bad, and the edge is wavy. Dents are hard to see please see pictures and let me know if you need anymore. I think a chrome shop will be able to fix this but of coarse it will be extra money. I WILL GIVE GARY 70 JIMMY A COUPLE OF DAYS FOR FIRST REFUSAL. 120 plus shipping. SOLD

**1rippen6** · 03-08-2015, 09:01 PM

more pics

Dale99 · 03-09-2015, 09:01 AM

I guess I have two rears.

I would like them if the other user passes as these were on my WTB list.

**1rippen6** · 03-09-2015, 09:37 AM

Quote:

Originally Posted by Dale99

I guess I have two rears.

I would like them if the other user passes as these were on my WTB list.

Sounds good I will give him until Wednesday and then they are yours.

**1rippen6** · 03-09-2015, 10:09 AM

Quote:

Originally Posted by Dale99

I guess I have two rears.

I would like them if the other user passes as these were on my WTB list.

Dale99 I looked at your wanted list what is #1 the vertical strip that holds the seal for the tailgate? If so I have a set for sale will move the post to the top.

**1rippen6** · 03-09-2015, 08:11 PM

Quote:

Originally Posted by Dale99

I guess I have two rears.

I would like them if the other user passes as these were on my WTB list.

Send me your zip and I will get you a shipping quote

**1rippen6** · 03-09-2015, 10:43 AM

Dale99 I have #4 also might not be any better than yours I moved it to the top so you can check it out.

Dale99 · 03-09-2015, 12:00 PM

ok, will go take a look

smbrouss70 · 03-09-2015, 03:45 PM

Can you get the angle of the bend on the front carpet strip for me? I have a good rear, and I think I will make a front one. Thanks.

**1rippen6** · 03-09-2015, 06:26 PM

Quote:

Originally Posted by smbrouss70

Can you get the angle of the bend on the front carpet strip for me? I have a good rear, and I think I will make a front one. Thanks.

I know another member tried to have a set made and was not very happy with them but you never know here you go

**IronCanine** · 03-09-2015, 07:14 PM

Quote:

Originally Posted by Dale99

I guess I have two rears.

I've seen them with two flats, one of each, and two clamp style...I think if you're Blazer is 70 or earlier, there's a strong possibility it's two flats, if it's a 72 there's a greater possibility that you've got two clamp style...this is only a general observation.

Quote:

Originally Posted by smbrouss70

Can you get the angle of the bend on the front carpet strip for me? I have a good rear, and I think I will make a front one. Thanks.

I had a set made by copying one I had on loan from 1Rippen. The hardest part is the tiny back bend...it's a two angle piece. The other hard part is the counter sink for the screws. Hopefully the chrome is bright enough to hide those differences.

I would have preferred to find two good ones to re-finish. A good set is hard to come by.

Dale99 · 03-09-2015, 08:52 PM

Quote:

Originally Posted by IronCanine

I've seen them with two flats, one of each, and two clamp style...I think if you're Blazer is 70 or earlier, there's a strong possibility it's two flats, if it's a 72 there's a greater possibility that you've got two clamp style...this is only a general observation.

Thanks for the info. Mine is a 72, and yes it would be two of the clamp style.

**1rippen6** · 03-09-2015, 06:26 PM

It actually reads about 43.5 but probably should be 45

**1rippen6** · 03-09-2015, 07:55 PM

Thanks for the info IronCanine I wasn't going to throw you under the bus LOL

**Gary 70 Jimmy** · 03-09-2015, 08:01 PM

I will pass them to some one else the ones I have might be better then yours thanks for posting them for me.

**1rippen6** · 03-09-2015, 08:07 PM

Quote:

Originally Posted by Gary 70 Jimmy

I will pass them to some one else the ones I have might be better then yours thanks for posting them for me.

Gary 70 Jimmy thanks for letting me know Dale99 your up

Dale99 · 03-09-2015, 08:50 PM

Sounds good, thanks Gary

sending pm rippen

**1rippen6** · 03-09-2015, 09:12 PM

Quote:

Originally Posted by Dale99

Sounds good, thanks Gary

sending pm rippen

Pm returned with shipping quote

Dale99 · 03-10-2015, 10:49 AM

funds sent

03-08-2015, 09:01 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Carpet strips more pics Attached Images

03-09-2015, 09:01 AM	#3
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Carpet strips I guess I have two rears. I would like them if the other user passes as these were on my WTB list. __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

03-09-2015, 10:43 AM	#7
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Carpet strips Dale99 I have #4 also might not be any better than yours I moved it to the top so you can check it out.

03-09-2015, 12:00 PM	#8
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Carpet strips ok, will go take a look

03-09-2015, 03:45 PM	#9
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: Carpet strips Can you get the angle of the bend on the front carpet strip for me? I have a good rear, and I think I will make a front one. Thanks. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-08-2015, 08:59 PM	#1
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Carpet strips Carpet strips rear one has pitting on both ends and front one has a couple of dents, bowed bad, and the edge is wavy. Dents are hard to see please see pictures and let me know if you need anymore. I think a chrome shop will be able to fix this but of coarse it will be extra money. I WILL GIVE GARY 70 JIMMY A COUPLE OF DAYS FOR FIRST REFUSAL. 120 plus shipping. SOLD Attached Images Last edited by 1rippen6; 03-10-2015 at 05:43 PM.

03-09-2015, 06:26 PM	#13
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Carpet strips It actually reads about 43.5 but probably should be 45

03-09-2015, 07:55 PM	#14
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Carpet strips Thanks for the info IronCanine I wasn't going to throw you under the bus LOL

03-09-2015, 08:01 PM	#15
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Carpet strips I will pass them to some one else the ones I have might be better then yours thanks for posting them for me. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

03-09-2015, 08:50 PM	#17
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Carpet strips Sounds good, thanks Gary sending pm rippen

03-10-2015, 10:49 AM	#19
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Carpet strips funds sent

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.