|
|
|
05-28-2015, 12:02 PM
|
#1 |
|
Registered User
Join Date: Jul 2011
Location: Tacoma, WA
Posts: 176
|
62 Fleetside metal
Anyone have or know where I can get a patch for this hole? I might just try and source the same thickness in sheet metal but thought it would be easier if the bend was already there.
__________________
1965 C10 Longbed Stepside 1969 Chevelle Malibu 1962 C20 Fleetside - Build Thread (Sold before I could finish) |
|
|
|
05-29-2015, 12:27 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 62 Fleetside metal
That piece wouldn't be very difficult to make from 18ga sheetmetal. The front cowl corners would be the same radius and often times those can be found for inexpensive. A junk door would work too. I don't throw away any 'bad' body parts. You never know what you might be able to use them for.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
05-29-2015, 08:22 PM
|
#3 |
|
Registered User
Join Date: Aug 2012
Location: Fort Campbell, KY
Posts: 494
|
Re: 62 Fleetside metal
I just cut out a 12" section from my fleetside on both sides of my truck when converting to a shortbed. I am on duty right now until 0800 tomorrow morning but I could send you what you need for free! Heres one of the sections leaning up against a bedside. Surface rust only and would clean up nice. Just let me know man.
|
|
|
|
|
05-29-2015, 10:09 PM
|
#4 |
|
Registered User
Join Date: Aug 2012
Location: Rathdrum ID
Posts: 1,129
|
Re: 62 Fleetside metal
I also have some junk fleetsides. I live in North Idaho so shipping would be cheaper. Let me know and I can cut the piece out for you.
__________________
66 shorty 
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
