factory look black bed wood results

[yote1234]

for those who want the factory look bed wood in black, I found this. hope it helps .
watch this.
http://www.woodworkerssource.com/blo...king-projects/

[Palf70Step]

That looks kool. I would have never thought of that.

[yote1234]

Originally Posted by Palf70Step

That looks kool. I would have never thought of that.

yea. im investigating the best way to do it. lots of reading up on this.

[Captmatt]

Finished mine a few weeks ago. Used ebony stain and spar urethane in satin finish. Four tries before I got the look that I wanted. Something that I did not think of, black shows EVERYTHING. Every speck of dust and every little imperfection in the finish is magnified . If possible do the urethane in a spray booth. All in all I'm happy with the way it looks.

[yote1234]

That's nice!!!!

[Indian113]

Captmat, That looks Awesome! I'm wanting to do that to our 64

[Uptown83]

Awesome plan to do this to my 66.

White truck with black wood? I think it would look good.

[theastronaut]

That looks really good. I'll have to remember that technique for when I do the bed floor in my '66.

I used oak and painted it with reduced exterior latex on the '65 I restored. Had a similar look.

[Metalaroundstone]

I noticed another option for black wood on the Mar K site where they tested different finishes. http://www.mar-k.com/final_summary.aspx and 2010 update at http://www.mar-k.com/june_2010_update.aspx

After years of testing they found that the following finish was the most durable compared to clear finishes. They did not compare different black finishes.

Oak boards, coated with three brushed coats of POR-15 Rust Preventative Paint three hours apart, then three coats brushed Behr best quality black exterior latex enamel, three hours apart.

[Monte's62]

Anything with POR-15 on it should last forever. I think I still have some on me from 2013. Great info guys.

[ACK]

Would've been great if they had included boiled linseed oil with lamp black in the test to see how the original bed board coating compared to the rest of the line up.

[TJ's Chevy]

Looks nice! Great ideas.

[Metalaroundstone]

Originally Posted by ACK

Would've been great if they had included boiled linseed oil with lamp black in the test to see how the original bed board coating compared to the rest of the line up.

That would have been a great idea. I wonder if anybody has redone their truck bed using the original formula and has left it out in the elements. I am also curious to know how the original finish holds up to the weather.

[cg285]

i did mine with southern yellow pine, linseed oil, lamp black and a binder. looks just like it did when you could still buy the bed boards from gm. been on 5 years and looks the same - however it doesn't stay out side all the time

my brother, the wood butcher, did his the same way but used oak. didn't come out black

[ACK]

Originally Posted by cg285

i did mine with southern yellow pine, linseed oil, lamp black and a binder. looks just like it did when you could still buy the bed boards from gm. been on 5 years and looks the same - however it doesn't stay out side all the time

my brother, the wood butcher, did his the same way but used oak. didn't come out black

What binder did you use? Do you recall the ratio of lamp black to linseed oil? I have the oil and the lamp black, but no recipe to create the concoction.

[cg285]

a lot of beers consumed the last 5 years. best i remember i winged it on the carbon black. i may have gotten a recommendation from where i got the binder as to how much binder. (i don't think the black/linseed ratio is overly critical)
took a lot of research to find a place that sold the binder:
guerrapaint.com

[cg285]

pigment, base and binder = paint
Posted via Mobile Device