Long tube headers sbc

[Irishbleueyes]

These say 67 and up but why wouldn't they work on a 65??
http://www.ebay.com/itm/Summit-Racin...de1902&vxp=mtr

[Captainfab]

I would say that the key question is, does your truck have a manual trans or an auto trans? Those headers may or may not work with the '63-'66 clutch bellcrank and linkage.

[Green chevy c20]

Hey. I bought these hook headers for my 1965 c20 with a 327 and an auto trans. They fit prefect in the truck. They are the hooker header 2452. No dings on the headers or cut frame. Haha. http://m.summitracing.com/parts/hok-2452hkr

[Irishbleueyes]

Originally Posted by Green chevy c20

Hey. I bought these hook headers for my 1965 c20 with a 327 and an auto trans. They fit prefect in the truck. They are the hooker header 2452. No dings on the headers or cut frame. Haha. http://m.summitracing.com/parts/hok-2452hkr

Ya, post pics lets see those HOOKERS

[Green chevy c20]

If you need more pictures let me know.

[Green chevy c20]

Here more.

[WOLFMANmike]

Originally Posted by Irishbleueyes

These say 67 and up but why wouldn't they work on a 65??
http://www.ebay.com/itm/Summit-Racin...de1902&vxp=mtr

if you have a automatic trans .. those will fit just fine and work just fine no prob but if not .. then no they wont .. but i must say that is a nice price for coated headers

[Greg63]

Originally Posted by Irishbleueyes

These say 67 and up but why wouldn't they work on a 65??
http://www.ebay.com/itm/Summit-Racin...de1902&vxp=mtr

I cant comment on the fitment of those headers but I see that they are 1 1/2" primaries, which is okay. I ran that size primary on my 327 for years. I switched to 1 5/8" primary sized headers in April and I now see more out of my 327 than before.
Food for thought.
Greg.

[OldChevy61]

Green Chevy c/20, I would like to see pics of your headers if possible. Especially from underneath. Would like to see where they attach to exhaust . does your truck have a bell cross member or automatic. Thanks.

[Irishbleueyes]

Ah ha! I have an auto trans, I knew those would fit! Yes, great price for coated headers and for a 283 I think 1 1/2 will be just fine. Thanks all When I get em on, may be a while I will post pics of them..

[morethanstock66]

Originally Posted by Green chevy c20

Hey. I bought these hook headers for my 1965 c20 with a 327 and an auto trans. They fit prefect in the truck. They are the hooker header 2452. No dings on the headers or cut frame. Haha. http://m.summitracing.com/parts/hok-2452hkr

I have the same hookers on my sbc. Just be careful with the plug wires, the primaries run close-especially with the #1 tube if you want plug wires under headers. The primaries are also closer than headmans I had previously