|
|
|
08-01-2015, 02:59 PM
|
#1 |
|
Registered User
Join Date: Dec 2013
Location: Oak Ridge, Mo.
Posts: 301
|
Sway Bar Mounting
I am installing my sway bar I picked up on my 1966 C-10, but....
I thought (first mistake) the frame brackets mounted where the rivets are for the cross member under the rad., and then drilled 2 more holes. But with my brackets mounted there, my bar is into the springs maybe 1/2 to a full inch, so I know that can't be right. Their is a slotted hole in front of the rivet holes, maybe 4 inches or so and I am thinking that's where the front of the bracket should be mounted. If anyone would have a pic or suggestion it would be greatly appreciated, thanks in advance !!! 
__________________
If you don't like this  pound sand .....
|
|
|
|
08-01-2015, 03:41 PM
|
#2 |
|
Registered User
Join Date: May 2015
Location: Las Cruces, NM
Posts: 38
|
Re: Sway Bar Mounting
I just installed mine. Went fine. I removed the bottom rivets too and realized I didnt need to. I think you are going to have to post some pics.
|
|
|
|
|
08-01-2015, 04:22 PM
|
#3 |
|
Senior Member
 
Join Date: Sep 2011
Location: Hanford, CA
Posts: 1,027
|
Re: Sway Bar Mounting
__________________
Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894 |
|
|
|
|
08-01-2015, 04:59 PM
|
#4 |
|
Registered User
Join Date: Dec 2013
Location: Oak Ridge, Mo.
Posts: 301
|
Re: Sway Bar Mounting
excellent - thanks ! (I see my mistake, duh
 )
__________________
If you don't like this pound sand .....
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
