Quick 4l80 fitting question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tilt · 08-19-2015, 03:21 PM

On the rear fitting for the trans cooler, I know the fitting that screws into the trans. has the longer end on it. My questions is, does the factory hard line that clips into the fitting also have a longer end that goes into the longer fitting or are the ends of the cooler lines the same on both lines? Thanks

Tilt · 08-19-2015, 08:07 PM

I found my answer.

**truckdude239** · 08-20-2015, 03:43 PM

i dont think its longer on the line but you have to have the long fittings for thr trans

clinebarger · 08-20-2015, 07:02 PM

Correct, The End of the hard line is the same for both cooler fittings.

Tilt · 08-20-2015, 08:17 PM

Thanks guys. That is what I was hoping to hear. I have been getting conflicting answers and didn't have the original 4L80 lines to compare.

08-19-2015, 03:21 PM	#1
Tilt Registered User Join Date: Jul 2014 Location: Dayton, TX Posts: 335	Quick 4l80 fitting question On the rear fitting for the trans cooler, I know the fitting that screws into the trans. has the longer end on it. My questions is, does the factory hard line that clips into the fitting also have a longer end that goes into the longer fitting or are the ends of the cooler lines the same on both lines? Thanks __________________ '83 Silverado Step Side '85 GMC short bed. '86 Chevy Step Side Custom Deluxe LQ9/4L80 swap (SOLD)

08-19-2015, 08:07 PM	#2
Tilt Registered User Join Date: Jul 2014 Location: Dayton, TX Posts: 335	Re: Quick 4l80 fitting question I found my answer. __________________ '83 Silverado Step Side '85 GMC short bed. '86 Chevy Step Side Custom Deluxe LQ9/4L80 swap (SOLD)

08-20-2015, 03:43 PM	#3
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Quick 4l80 fitting question i dont think its longer on the line but you have to have the long fittings for thr trans __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

08-20-2015, 07:02 PM	#4
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: Quick 4l80 fitting question Correct, The End of the hard line is the same for both cooler fittings.

08-20-2015, 08:17 PM	#5
Tilt Registered User Join Date: Jul 2014 Location: Dayton, TX Posts: 335	Re: Quick 4l80 fitting question Thanks guys. That is what I was hoping to hear. I have been getting conflicting answers and didn't have the original 4L80 lines to compare. __________________ '83 Silverado Step Side '85 GMC short bed. '86 Chevy Step Side Custom Deluxe LQ9/4L80 swap (SOLD)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.