rim id - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sawman · 09-03-2015, 03:31 PM

trying to see if I could find out what year rim this is,its 16.5 8,25 wide,on front inside rim says k 1-1-5 5 cp thanks

**mr48chev** · 09-03-2015, 07:19 PM

I'm thinking that Chevrolet didn't have 8 inch wheels until sometime into the 70's

Photos are worth a lot as we don't know if you are looking at a 5, 6 or 8 lug wheel or anything else about it and I've been playing with these over 40 years and have worked on cars and trucks over 50 years and stamped numbers inside a rim don't mean squat to me as I have no chart and know of no chart to define what they mean. I know guys use those numbers to id certain wheels but that is all I know about it.

sawman · 09-03-2015, 07:24 PM

its 6 lug,has clips by the lug holes,i took these off years ago off a 61,

**mr48chev** · 09-03-2015, 09:07 PM

Probably a stock 61 wheel then. It was always my thinking that the wider Chevy pickup wheels were 6-1/2 or 7 up into the 70's

I take it your measurement was taken like this drawing shows?

sawman · 09-04-2015, 12:26 AM

yes ,I even have 2 wider ones,thanks

09-03-2015, 03:31 PM	#1
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	rim id trying to see if I could find out what year rim this is,its 16.5 8,25 wide,on front inside rim says k 1-1-5 5 cp thanks

09-03-2015, 07:19 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: rim id I'm thinking that Chevrolet didn't have 8 inch wheels until sometime into the 70's Photos are worth a lot as we don't know if you are looking at a 5, 6 or 8 lug wheel or anything else about it and I've been playing with these over 40 years and have worked on cars and trucks over 50 years and stamped numbers inside a rim don't mean squat to me as I have no chart and know of no chart to define what they mean. I know guys use those numbers to id certain wheels but that is all I know about it. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-03-2015, 07:24 PM	#3
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: rim id its 6 lug,has clips by the lug holes,i took these off years ago off a 61,

09-03-2015, 09:07 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: rim id Probably a stock 61 wheel then. It was always my thinking that the wider Chevy pickup wheels were 6-1/2 or 7 up into the 70's I take it your measurement was taken like this drawing shows? __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-04-2015, 12:26 AM	#5
sawman Registered User Join Date: Mar 2015 Location: susanville ca Posts: 1,170	Re: rim id yes ,I even have 2 wider ones,thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.