Electric 66 speedo

[cru_zn_29]

Looking for info on converting my 66 factory speedo (cable driven) to a newer electric unit for my 4l80. I want it to look original. I have found info on 68-72
but not on 64-66 thanks

[nsb29]

Originally Posted by cru_zn_29

Looking for info on converting my 66 factory speedo (cable driven) to a newer electric unit for my 4l80. I want it to look original. I have found info on 68-72
but not on 64-66 thanks

me to

[65standard]

This let's you keep and use your original speedometer.

http://www.abbott-tach.com/Cable%20X.html

[ls1nova71]

Originally Posted by cru_zn_29

Looking for info on converting my 66 factory speedo (cable driven) to a newer electric unit for my 4l80. I want it to look original. I have found info on 68-72
but not on 64-66 thanks

Your best bet is going to be trying to use the guts out of a Caprice speedo from around 95 or so. They are the only long sweeping electric speedos that I have found. At some point I'm going to try and make one work in my Nova and since its similar, I would thonk the trucks could be done too. It's mostly just trial and error to figure out everything. Good luck with it and if you try it, keep us posted on your progress.

[cru_zn_29]

Originally Posted by ls1nova71

Your best bet is going to be trying to use the guts out of a Caprice speedo from around 95 or so. They are the only long sweeping electric speedos that I have found. At some point I'm going to try and make one work in my Nova and since its similar, I would thonk the trucks could be done too. It's mostly just trial and error to figure out everything. Good luck with it and if you try it, keep us posted on your progress.

Thanks for the info. That gives me a starting point

[ls1nova71]

Ok, did a little Googling, and it's a '91-'93 Caprice. Looks very close, but the truck is 100mph where as the Caprice is 80, but might be close enough to work by moving the needle down a bit since it looks like the truck has a little bit more sweep to it. Then you would just have to move the odometer, which should be doable since electric ones aren't built into the speedo like the cable driven ones are.

[zach_carver]

Ill be doing this same thing here shortly, plan to use abbott x conversion box to retain my factory gauges. pricey but ive yet to find any other options.

[cru_zn_29]

Originally Posted by ls1nova71

Ok, did a little Googling, and it's a '91-'93 Caprice. Looks very close, but the truck is 100mph where as the Caprice is 80, but might be close enough to work by moving the needle down a bit since it looks like the truck has a little bit more sweep to it. Then you would just have to move the odometer, which should be doable since electric ones aren't built into the speedo like the cable driven ones are.

When wiring this type elect speedo from the 4l80 rear vss does the wiring still go to the e38 ecm. I am confused how it needs to be wired?

[ls1nova71]

Originally Posted by cru_zn_29

When wiring this type elect speedo from the 4l80 rear vss does the wiring still go to the e38 ecm. I am confused how it needs to be wired?

What year is your engine, and what's it out of? E38's will have to be tuned for a speedo output and the wire will have to be added to the harness, then your speedo will hook up to that.

Originally Posted by zach_carver

Ill be doing this same thing here shortly, plan to use abbott x conversion box to retain my factory gauges. pricey but ive yet to find any other options.

I've had 4 Cable-X's and their quality has gone down on each one I bought. The first one I bought in 2001 still works perfect with over 100k miles on it, but the newest one I bought doesn't work nearly as good. Not sure why that is though. Dakota Digital makes one now though that seems easier to use and calibrate, although I have no personal experience with it. http://www.dakotadigital.com/index.c...rod/prd886.htm

[Daaaanz67]

Has anyone seen the new release for Dakota Digital electric speedo drive for cable. Watch video on YouTube search Dakota digital.