9.5" wheel with 285mm tire on the front? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wilson! · 12-27-2015, 01:49 AM

looking at running an 18x9.5 with a 285/40. this tire is 27" tall and 11.42" sidewall to sidewall. the truck will have CPP modular drop spindles and 79 C10 control arms with 2" drop springs. currently have 275/60/15 on 8" rallies all around with no rubbing anywhere. possible to fit this 18" wheel/tire combo under the front without rubbing?

**Palf70Step** · 12-27-2015, 09:02 AM

That is a LOT of wheel and tire for the front. Can't say I have seen anyone go that big on one they will actually drive. I'd say and 8 or 8.5 wide rim with about a 245/ 40/45 would be about the size.

LVPhotos · 12-27-2015, 12:58 PM

Here is some pictures. I run the 245/45/18 Nitto 555s. Front and 295/45 rear. If your lower the inner fenders will rub with a wide tire.
http://67-72chevytrucks.com/vboard/s...d.php?t=602275

Wilson! · 12-27-2015, 02:12 PM

The truck is currently lowered with cut spring (that way when I bought it) and has a 275 on the front without any rubbing. I may order the rear wheels and tires and see how they fit on the front. If I don't like them, I'll order a set of 8" wide with some 255s.

12-27-2015, 01:49 AM	#1
Wilson! Registered User Join Date: Oct 2014 Location: Huntsville Posts: 55	9.5" wheel with 285mm tire on the front? looking at running an 18x9.5 with a 285/40. this tire is 27" tall and 11.42" sidewall to sidewall. the truck will have CPP modular drop spindles and 79 C10 control arms with 2" drop springs. currently have 275/60/15 on 8" rallies all around with no rubbing anywhere. possible to fit this 18" wheel/tire combo under the front without rubbing?

12-27-2015, 09:02 AM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,225	Re: 9.5" wheel with 285mm tire on the front? That is a LOT of wheel and tire for the front. Can't say I have seen anyone go that big on one they will actually drive. I'd say and 8 or 8.5 wide rim with about a 245/ 40/45 would be about the size. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-27-2015, 12:58 PM	#3
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: 9.5" wheel with 285mm tire on the front? Here is some pictures. I run the 245/45/18 Nitto 555s. Front and 295/45 rear. If your lower the inner fenders will rub with a wide tire. http://67-72chevytrucks.com/vboard/s...d.php?t=602275 __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

12-27-2015, 02:12 PM	#4
Wilson! Registered User Join Date: Oct 2014 Location: Huntsville Posts: 55	Re: 9.5" wheel with 285mm tire on the front? The truck is currently lowered with cut spring (that way when I bought it) and has a 275 on the front without any rubbing. I may order the rear wheels and tires and see how they fit on the front. If I don't like them, I'll order a set of 8" wide with some 255s.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.