Radiator fittings for trans cooler lines???

[Nodnarb76]

Ran into a problem with my LS swap on my 87 Suburban.
I don't have the correct fittings to attach my transmission cooler lines with 6an connectors to my radiator. Using an Enytopy radiator by the way.

[mongocanfly]

You'll have to know what size/threads those bungs are..if you don't know contact them to find out what you need,, would be my suggestion.

[qwik]

Most are 1/2-20 straight thread, I've used 6an to 1/2-20 flare fittings with an o-ring.

[Willie Makeit]

Qwik is correct in that it is straight 1/2"-20 threads but it is also an inverted flare fitting. you'll need something like this to connect it to an AN fitting.

http://www.ebay.com/itm/230894574606...%3AMEBIDX%3AIT

[Hart_Rod]

Originally Posted by Nodnarb76

Ran into a problem with my LS swap on my 87 Suburban.
I don't have the correct fittings to attach my transmission cooler lines with 6an connectors to my radiator. Using an Enytopy radiator by the way.

Whose radiator do you have? Entropy suggest using a 5/16" inverted flare to a 6AN fitting in their radiator.

[roushinator]

Originally Posted by Hart_Rod

Whose radiator do you have? Entropy suggest using a 5/16" inverted flare to a 6AN fitting in their radiator.

Glad to know i was about to order some.