for sale set of 882 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kevhill85 · 09-29-2003, 12:40 PM

they have 194/150 in them and they need to be clean up . will take 50.00 for the set . will take trade for motor parts

79Chevypickup · 09-29-2003, 06:29 PM

Hey kevin,

Whats a set of 882?

Jessechop · 09-29-2003, 06:43 PM

I assume they are small block heads ending with the casting numbers 882, comonly refered to as 882's

bpmcgee · 09-29-2003, 07:10 PM

Yup, that's what they'd be. 882's are pretty common "emissions" heads if my memory serves me correctly.

Brian

kevhill85 · 09-29-2003, 08:14 PM

the emissions i don't know about . the rest u r right . they r good go fast head . the need little work to flow good. they like 170 or 180 cc runner . they work good for performance motor .

kevhill85 · 09-29-2003, 08:19 PM

here a good place to look at casting number for gm

http://www.mortec.com/castnum.htm

soleeagle · 10-02-2003, 12:34 AM

Are they the heavy casting 882 or the light? The light casting seems to crack bad.

kevhill85 · 10-02-2003, 06:00 AM

i only know of one 882 head . none of my book show anyother 882. so don't real no how to answer the question .

benscool1 · 10-02-2003, 11:13 AM

would you be able to ship? If so, would it be safe so they wouldn't get damaged? Let me know.

Thanks,
- Ben

Tom · 10-02-2003, 02:11 PM

All 882's are emissions heads with 76cc chambers and about 160cc intakes, and are all light castings.

kevhill85 · 10-02-2003, 04:35 PM

i was think they where 170. thought it was close . yes i can ship. if u pay shipping

kevhill85 · 10-02-2003, 04:36 PM

the intake runner make them a good flow head for low $$$$$$$$$$$

TwinTurbo · 10-02-2003, 05:19 PM

yup, open chamber 76 cc, 160cc intake runner smog head. They're light castings but not as light as the troublesome 462624s that are prone to cracking. They do have a reasonable flow on the intake but the chamber design makes it that they're not real performance heads, just nice. All in all, open chambered heads suck

44th Miss Inf · 10-02-2003, 05:39 PM

882s were made in both castings.

The 74-75 were the heavier castings and in 76 GM went to the lighter castings.

Easiest way to tell is around the spark plug holes. ''Heavy'' heads are cast straight below the spark plug bosses,where light heads haves 'scallops' below the plugs.

Virgil

kevhill85 · 10-02-2003, 05:54 PM

if that true . then they r the heavy .

Sample · 10-02-2003, 07:04 PM

Could I just drop them on, or would they need new seals? Fit an '83 K5 with 350?

kevhill85 · 10-02-2003, 10:32 PM

that would be up to u . i would have them cleaned up at a shop . they have no cracks . they have been check for that before i bought them . i went with a set of AFR HEADS. they fit any 350

soleeagle · 10-02-2003, 11:45 PM

Thank You 44th MISS INF.

I have 3 sets of these heads and ended up with 3 of each type of casting. They also have both 1.72 and 1.94 intake valves. Have 3 each of these also. The missmatch set was on my truck when i bought it, no wonder it didnt run good.

kevhill85 · 10-08-2003, 06:06 PM

they r still for sale

09-29-2003, 12:40 PM	#1
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	for sale set of 882 they have 194/150 in them and they need to be clean up . will take 50.00 for the set . will take trade for motor parts __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

09-29-2003, 06:29 PM	#2
79Chevypickup MY TRUCK IS FOR SALE!! Join Date: Sep 2003 Location: Pasadena, TX Posts: 292	Hey kevin, Whats a set of 882? __________________ 1979 Chevy LWB 350ci / 700R4 Edelbrock under the hood F O R S A L E OR T R A D E

09-29-2003, 08:14 PM	#5
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	the emissions i don't know about . the rest u r right . they r good go fast head . the need little work to flow good. they like 170 or 180 cc runner . they work good for performance motor . __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

09-29-2003, 08:19 PM	#6
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	here a good place to look at casting number for gm http://www.mortec.com/castnum.htm __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

10-02-2003, 12:34 AM	#7
soleeagle Registered User Join Date: Sep 2003 Location: Shelbyville, Indiana Posts: 614	Are they the heavy casting 882 or the light? The light casting seems to crack bad. __________________ Chuck '85 Chevy Silverado 4X4 '91 Chevy 4X4 Suburban http://www.cardomain.com/memberpage/545941

09-29-2003, 06:43 PM	#3
Jessechop Registered User Join Date: Sep 2003 Location: maine Posts: 191	I assume they are small block heads ending with the casting numbers 882, comonly refered to as 882's

09-29-2003, 07:10 PM	#4
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Yup, that's what they'd be. 882's are pretty common "emissions" heads if my memory serves me correctly. Brian

10-02-2003, 06:00 AM	#8
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i only know of one 882 head . none of my book show anyother 882. so don't real no how to answer the question . __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

10-02-2003, 11:13 AM	#9
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	would you be able to ship? If so, would it be safe so they wouldn't get damaged? Let me know. Thanks, - Ben __________________ Ben 84 C10 Silverado 14 Silverado Z71

10-02-2003, 02:11 PM	#10
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,750	All 882's are emissions heads with 76cc chambers and about 160cc intakes, and are all light castings. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

10-02-2003, 04:35 PM	#11
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i was think they where 170. thought it was close . yes i can ship. if u pay shipping __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

10-02-2003, 04:36 PM	#12
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	the intake runner make them a good flow head for low $$$$$$$$$$$ __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

10-02-2003, 05:19 PM	#13
TwinTurbo Registered User Join Date: Sep 2003 Location: The Netherlands Posts: 994	yup, open chamber 76 cc, 160cc intake runner smog head. They're light castings but not as light as the troublesome 462624s that are prone to cracking. They do have a reasonable flow on the intake but the chamber design makes it that they're not real performance heads, just nice. All in all, open chambered heads suck

10-02-2003, 05:39 PM	#14
44th Miss Inf Registered User Join Date: Sep 2002 Location: Liberty, Mississippi Posts: 673	882s were made in both castings. The 74-75 were the heavier castings and in 76 GM went to the lighter castings. Easiest way to tell is around the spark plug holes. ''Heavy'' heads are cast straight below the spark plug bosses,where light heads haves 'scallops' below the plugs. Virgil

10-02-2003, 05:54 PM	#15
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	if that true . then they r the heavy . __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet



Register or Log In To remove these advertisements.

10-02-2003, 07:04 PM	#16
Sample Registered User Join Date: Jul 2003 Location: Apache Junction, AZ 85220 Posts: 25	Could I just drop them on, or would they need new seals? Fit an '83 K5 with 350?

10-02-2003, 10:32 PM	#17
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	that would be up to u . i would have them cleaned up at a shop . they have no cracks . they have been check for that before i bought them . i went with a set of AFR HEADS. they fit any 350 __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

10-02-2003, 11:45 PM	#18
soleeagle Registered User Join Date: Sep 2003 Location: Shelbyville, Indiana Posts: 614	Thank You 44th MISS INF. I have 3 sets of these heads and ended up with 3 of each type of casting. They also have both 1.72 and 1.94 intake valves. Have 3 each of these also. The missmatch set was on my truck when i bought it, no wonder it didnt run good. __________________ Chuck '85 Chevy Silverado 4X4 '91 Chevy 4X4 Suburban http://www.cardomain.com/memberpage/545941

10-08-2003, 06:06 PM	#19
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	they r still for sale __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.