IA 73-80 pulse delay conversion kits 2 left... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*gmachinz* · 07-21-2016, 12:58 PM

I have 2 of these kits left at the moment-delays have been tested, includes a conversion harness and a diagram. Must use 78-up motor and motor linkage arm. $90 shipped each just like the last batch!
73-77 sorry.

bluex · 07-22-2016, 12:02 AM

Do you have a good delay module an switch for the 78 an up?

*gmachinz* · 07-22-2016, 02:18 AM

Yes I do....several in fact. $50 shipped if you'd like one!

covingtontn · 07-22-2016, 07:18 PM

Hey G

Do you have a pic of the conversion and harness?
Thanks
John

*gmachinz* · 07-22-2016, 08:33 PM

Here's a pic...

bluex · 07-22-2016, 10:40 PM

Quote:

Originally Posted by gmachinz

Yes I do....several in fact. $50 shipped if you'd like one!

Yes please! Pm me the info, thanks!

*gmachinz* · 07-22-2016, 11:12 PM

Quote:

Originally Posted by bluex

Yes please! Pm me the info, thanks!

Ok...PM coming....

covingtontn · 07-22-2016, 11:35 PM

Thanks G

If you come up with anything, please let me know. I would be happy to pay for one that would work on my 84 to 71 conversion.

Thanks
John

*gmachinz* · 07-22-2016, 08:37 PM

This is a stock 1977 2-speed wiper motor....you need to change this out for a 1978-up motor....and the wiper motor linkage arm is different too-they don't interchange so you need to use a 1978-up arm/nut as well due to the threaded shaft on the 1978-up motors being slightly bigger-the pivot ball which attaches to the linkage arm assembly is the same for all 1973-87 tho.

*gmachinz* · 07-22-2016, 08:40 PM

On the same 1977 GMC High Sierra truck, here is the 1978 motor and new harness leads all tested and ready to go! In my lot I also provide instructions for swapping out leads on the cab side of the fuse panel bulkhead connector too!

covingtontn · 07-22-2016, 10:04 PM

Hello G

Con this conversion be changed to work with a vehicle with updated steering column with the wipers on the column.
Thanks
John

*gmachinz* · 07-22-2016, 10:22 PM

Well the 84-up trucks have a different design where the stalk has the delay feature built in and there is a pulse delay circuit board integrated into the whole circuit too-not sure if it is even worth trying to make work ya know...? What year/type of wiper switch are you thinking about?

covingtontn · 07-22-2016, 10:40 PM

Hi
I have a 71 chevy truck and I wanted to put a 84 chevy column in it.
If you think this would work let me know.
John

05duramaxhd · 07-23-2016, 11:01 PM

Got my package thanks!!

*gmachinz* · 07-23-2016, 11:04 PM

Quote:

Originally Posted by 05duramaxhd

Got my package thanks!!

You are very welcome!

Tiger Joe · 07-24-2016, 08:41 PM

Do you still have any of these left?

We have a 79 so I assume it would be a "plug and play" since it already has the correct motor.

*gmachinz* · 07-24-2016, 09:29 PM

Quote:

Originally Posted by Tiger Joe

Do you still have any of these left?

We have a 79 so I assume it would be a "plug and play" since it already has the correct motor.

Yes I do Joe! $50 to jenwood77@mchsi.com and I'll get one going your way!

Tiger Joe · 07-25-2016, 07:27 AM

I'll take one, sending PM

86454k30 · 07-25-2016, 11:31 PM

So I just bought a 77 K20, what do I need and how much to convert to delay?

*gmachinz* · 07-25-2016, 11:44 PM

The cost for a conversion kit is $90 shipped. You simply need to use a 1978-83 wiper motor and junkyard source the 78-up motor arm and nut too.

86454k30 · 07-26-2016, 12:01 AM

Quote:

Originally Posted by gmachinz

The cost for a conversion kit is $90 shipped. You simply need to use a 1978-83 wiper motor and junkyard source the 78-up motor arm and nut too.

Gotcha, so no way around changing motor/linkage.

*gmachinz* · 07-26-2016, 12:05 AM

Right-it's a simple change tho. And, you'll need to enlarge the existing squarish hole in the dash where the stock wiper switch is located. You will need to drill 2 small holes to add the 78-up style delay switch-the 77 switch has mounts on top/bottom whereas the 78-83 switches are at opposite corners.

*gmachinz* · 07-26-2016, 10:22 PM

All pulse/delay kits are SOLD as of right now.....I'll put up a new listing when I have more available....thanks guys!

covingtontn · 08-09-2016, 01:50 AM

Hello
Did you every have any luck with the harness for 71 chevy to 84 chevy
wiper mod?
Thanks
John

*gmachinz* · 08-09-2016, 10:05 AM

Hey John-I haven't forgot about ya! I've just been super busy this last couple of weeks. Besides building harnesses I've been moving a lot of my NOS sheetmetal locally for guys too so it's been hectic....but a fun hectic. I'll keep ya posted-I have a local customer with a 67 C10 I may try to convert just to work out a harness for such a conversion.

07-21-2016, 12:58 PM	#1
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	73-80 pulse delay conversion kits 2 left... I have 2 of these kits left at the moment-delays have been tested, includes a conversion harness and a diagram. Must use 78-up motor and motor linkage arm. $90 shipped each just like the last batch! 73-77 sorry.

07-22-2016, 12:02 AM	#2
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Re: 73-80 pulse delay conversion kits 2 left... Do you have a good delay module an switch for the 78 an up? __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

07-22-2016, 02:18 AM	#3
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... Yes I do....several in fact. $50 shipped if you'd like one!

07-22-2016, 07:18 PM	#4
covingtontn Registered User Join Date: Jul 2015 Location: covington tennessee Posts: 153	Re: 73-80 pulse delay conversion kits 2 left... Hey G Do you have a pic of the conversion and harness? Thanks John

07-22-2016, 08:33 PM	#5
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... Here's a pic... Attached Images

07-22-2016, 11:35 PM	#8
covingtontn Registered User Join Date: Jul 2015 Location: covington tennessee Posts: 153	Re: 73-80 pulse delay conversion kits 2 left... Thanks G If you come up with anything, please let me know. I would be happy to pay for one that would work on my 84 to 71 conversion. Thanks John

07-22-2016, 08:37 PM	#9
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... This is a stock 1977 2-speed wiper motor....you need to change this out for a 1978-up motor....and the wiper motor linkage arm is different too-they don't interchange so you need to use a 1978-up arm/nut as well due to the threaded shaft on the 1978-up motors being slightly bigger-the pivot ball which attaches to the linkage arm assembly is the same for all 1973-87 tho. Attached Images

07-22-2016, 08:40 PM	#10
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... On the same 1977 GMC High Sierra truck, here is the 1978 motor and new harness leads all tested and ready to go! In my lot I also provide instructions for swapping out leads on the cab side of the fuse panel bulkhead connector too! Attached Images

07-22-2016, 10:04 PM	#11
covingtontn Registered User Join Date: Jul 2015 Location: covington tennessee Posts: 153	Re: 73-80 pulse delay conversion kits 2 left... Hello G Con this conversion be changed to work with a vehicle with updated steering column with the wipers on the column. Thanks John

07-22-2016, 10:22 PM	#12
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... Well the 84-up trucks have a different design where the stalk has the delay feature built in and there is a pulse delay circuit board integrated into the whole circuit too-not sure if it is even worth trying to make work ya know...? What year/type of wiper switch are you thinking about?

07-22-2016, 10:40 PM	#13
covingtontn Registered User Join Date: Jul 2015 Location: covington tennessee Posts: 153	Re: 73-80 pulse delay conversion kits 2 left... Hi I have a 71 chevy truck and I wanted to put a 84 chevy column in it. If you think this would work let me know. John

07-23-2016, 11:01 PM	#14
05duramaxhd Registered User Join Date: Jan 2013 Location: Newalla, OK Posts: 600	Re: 73-80 pulse delay conversion kits 2 left... Got my package thanks!!

07-24-2016, 08:41 PM	#16
Tiger Joe Registered User Join Date: Mar 2015 Location: South of Pittsburgh Posts: 428	Re: 73-80 pulse delay conversion kits 2 left... Do you still have any of these left? We have a 79 so I assume it would be a "plug and play" since it already has the correct motor.

07-25-2016, 07:27 AM	#18
Tiger Joe Registered User Join Date: Mar 2015 Location: South of Pittsburgh Posts: 428	Re: 73-80 pulse delay conversion kits 2 left... I'll take one, sending PM

07-25-2016, 11:31 PM	#19
86454k30 Registered User Join Date: May 2008 Location: Spokane, Washington Posts: 596	Re: 73-80 pulse delay conversion kits 2 left... So I just bought a 77 K20, what do I need and how much to convert to delay?



Register or Log In To remove these advertisements.

07-25-2016, 11:44 PM	#20
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... The cost for a conversion kit is $90 shipped. You simply need to use a 1978-83 wiper motor and junkyard source the 78-up motor arm and nut too.

07-26-2016, 12:05 AM	#22
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... Right-it's a simple change tho. And, you'll need to enlarge the existing squarish hole in the dash where the stock wiper switch is located. You will need to drill 2 small holes to add the 78-up style delay switch-the 77 switch has mounts on top/bottom whereas the 78-83 switches are at opposite corners.

07-26-2016, 10:22 PM	#23
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... All pulse/delay kits are SOLD as of right now.....I'll put up a new listing when I have more available....thanks guys!

08-09-2016, 01:50 AM	#24
covingtontn Registered User Join Date: Jul 2015 Location: covington tennessee Posts: 153	Re: 73-80 pulse delay conversion kits 2 left... Hello Did you every have any luck with the harness for 71 chevy to 84 chevy wiper mod? Thanks John

08-09-2016, 10:05 AM	#25
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... Hey John-I haven't forgot about ya! I've just been super busy this last couple of weeks. Besides building harnesses I've been moving a lot of my NOS sheetmetal locally for guys too so it's been hectic....but a fun hectic. I'll keep ya posted-I have a local customer with a 67 C10 I may try to convert just to work out a harness for such a conversion.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.