Power doors to manual conversion how hard - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dragn91 · 07-22-2016, 03:01 PM

I'm picking up a complete 90 suburban with a bad trans I only want the doors for my crew cab. How hard is it to convert them from electric to manual as I'd really like to run my factory door panels.

**1774btcrew** · 07-23-2016, 12:50 AM

Just bolt in your manual regulators in place of the power ones

dragn91 · 07-28-2016, 05:55 PM

Anyone know if you have to pull the whole door apart to swap the window regulators or can I just pull them out and switch them with the glass and all in. If I have to pull them all down I may just convert to electric

hkrob · 07-28-2016, 11:46 PM

I converted from power to manuel it was pretty easy no need to dissemble the complete door or anything just pull the panel and swap them.

dragn91 · 07-29-2016, 01:00 PM

How did you get the door glass separated from the assembly to pull it out without taking the glass out. I did one back door it was entirely to bad just time consuming I'm stuck on the driver front because the windows stuck up so I can't get the glass out

hkrob · 07-29-2016, 11:33 PM

Quote:

Originally Posted by dragn91

How did you get the door glass separated from the assembly to pull it out without taking the glass out. I did one back door it was entirely to bad just time consuming I'm stuck on the driver front because the windows stuck up so I can't get the glass out

Unbolt the regulator from the door then use the window power up/down switch to line up the notch in the center of the window track. might take a minute or 2 to find the sweet spot.

07-22-2016, 03:01 PM	#1
dragn91 Registered User Join Date: Aug 2007 Location: charlestown maryland Posts: 272	Power doors to manual conversion how hard I'm picking up a complete 90 suburban with a bad trans I only want the doors for my crew cab. How hard is it to convert them from electric to manual as I'd really like to run my factory door panels.

07-23-2016, 12:50 AM	#2
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Power doors to manual conversion how hard Just bolt in your manual regulators in place of the power ones __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

07-28-2016, 05:55 PM	#3
dragn91 Registered User Join Date: Aug 2007 Location: charlestown maryland Posts: 272	Re: Power doors to manual conversion how hard Anyone know if you have to pull the whole door apart to swap the window regulators or can I just pull them out and switch them with the glass and all in. If I have to pull them all down I may just convert to electric

07-28-2016, 11:46 PM	#4
hkrob Registered User Join Date: Dec 2011 Location: Baldwin Park CA Posts: 4	Re: Power doors to manual conversion how hard I converted from power to manuel it was pretty easy no need to dissemble the complete door or anything just pull the panel and swap them.

07-29-2016, 01:00 PM	#5
dragn91 Registered User Join Date: Aug 2007 Location: charlestown maryland Posts: 272	Re: Power doors to manual conversion how hard How did you get the door glass separated from the assembly to pull it out without taking the glass out. I did one back door it was entirely to bad just time consuming I'm stuck on the driver front because the windows stuck up so I can't get the glass out

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.