B-47 bearing help

[86dean63]

Recently purchased a 63 C20 it's a two wheel drive 8 lug. Whent to replace the front outer wheel bearings and they are big roller ball bearings with a part number of B-47, called the local parts stores and then some, everyone knew what I was looking for but nobody has anything in stock and can't order them. I need to find a replacement set or a interchange bearing. Anything would help thanks
Posted via Mobile Device
Posted via Mobile Device

[padresag]

is this what you are looking for?
http://www.oreillyauto.com/site/c/de...0055&ppt=C0337
make sure that it is the ball bearing one that you want and not the roller needle koyo or torrington bearings
ron

[86dean63]

Yes that is the bearing that I'm looking for how ever they are out of stock completely
Posted via Mobile Device

[padresag]

Originally Posted by 86dean63

Yes that is the bearing that I'm looking for how ever they are out of stock completely
Posted via Mobile Device

there are more place to look for it. you just have broaden your horizons a little. if you are going to keep the truck you will have to learn how to search for these things. there are more than likely quite a few places around your area that supplie brgs other than automotive. that brg may have industrial or farming applications. there should be independent bearing house around
ron

[padresag]

Originally Posted by padresag

there are more place to look for it. you just have broaden your horizons a little. if you are going to keep the truck you will have to learn how to search for these things. there are more than likely quite a few places around your area that supplie brgs other than automotive. that brg may have industrial or farming applications. there should be independent bearing house around
ron

here are some bearing suppliers in your area
https://www.google.ca/webhp?sourceid...s%2C%20georgia
I would check your vin # to make sure that you have a 63. in some places if inventory was not sold until the next inventory year they got classified as the current year. someone may also have changed things around and going by bearing # is usually positive for what fits. the timkens are usually less expensive than the 60-62 frt ball brg wheel brgs
ron

[jtrichard]

Some thing may NOT be right on your front end 62 was the last year for ball bearings 63 has timken type bearings

[jtrichard]

TRY these guys http://www.locateballbearings.com/

[61K10]

rockauto lists it for a 62 but not 63

[Brad54]

If you go to a bearing supply place (industrial supply house), and measure the ID of the race, and the OD of the bearing housing, and the overall width of the entire assembly, that's pretty much the critical dimensions you'll need. After that point, you can replace the ball bearing with a roller bearing of those dimensions.

-Brad

[padresag]

Originally Posted by Brad54

If you go to a bearing supply place (industrial supply house), and measure the ID of the race, and the OD of the bearing housing, and the overall width of the entire assembly, that's pretty much the critical dimensions you'll need. After that point, you can replace the ball bearing with a roller bearing of those dimensions.

-Brad

if you look closely at the b75 you will notice that the inner race is different on either side causing a problem perhaps in converting it to a timken.look at the 2 pictures in the link
http://www.oreillyauto.com/site/c/de...0055&ppt=C0337

ron