Intake to Booster Hose - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1bad396ss · 09-26-2016, 11:13 PM

What hose (part number or size) is required to run from the truck intake 2003 4.8L to the vacuum booster (CPP)?

Is there a specific hose that fits nicely or will a generic size be required?

I don't have the factory hose of the donor vehicle.

Nodnarb76 · 10-04-2016, 11:57 AM

When I was doing my swap (LQ4 into 87 Suburban) My nipple on the motor was a little different in size than the nipple on my brake booster. I had to get two pieces of hose and a brass barbed adapter from Home Depot to make it work.
I'm sorry I can't remember what size the hoses or the adapter was.

SBTork · 10-17-2016, 10:46 PM

I can't remember the part number but I called a local chevy dealer and had them order me the correct part for an '06 Silverado with a V8. Worked perfectly on my '85 Suburban with a 5.3 from an '05 Avalanche. Also had them order me the correct nipple too, I think it was less than $30 for both pieces. Worth the money and way better looking than piecing something together IMO

72MARIO · 10-18-2016, 08:00 AM

I had the same problem. Ended up using 2002 gmc Yukon Denali hose and fitting. The 2003 Z71 4x4 was to small

09-26-2016, 11:13 PM	#1
1bad396ss Registered User Join Date: Jul 2012 Location: STL MO Posts: 85	Intake to Booster Hose What hose (part number or size) is required to run from the truck intake 2003 4.8L to the vacuum booster (CPP)? Is there a specific hose that fits nicely or will a generic size be required? I don't have the factory hose of the donor vehicle.

10-04-2016, 11:57 AM	#2
Nodnarb76 Registered User Join Date: May 2013 Location: Mississippi Posts: 501	Re: Intake to Booster Hose When I was doing my swap (LQ4 into 87 Suburban) My nipple on the motor was a little different in size than the nipple on my brake booster. I had to get two pieces of hose and a brass barbed adapter from Home Depot to make it work. I'm sorry I can't remember what size the hoses or the adapter was. __________________ 1987 R20 Suburban LQ4/4L80e swap: http://67-72chevytrucks.com/vboard/s...d.php?t=693824

10-17-2016, 10:46 PM	#3
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Intake to Booster Hose I can't remember the part number but I called a local chevy dealer and had them order me the correct part for an '06 Silverado with a V8. Worked perfectly on my '85 Suburban with a 5.3 from an '05 Avalanche. Also had them order me the correct nipple too, I think it was less than $30 for both pieces. Worth the money and way better looking than piecing something together IMO __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

10-18-2016, 08:00 AM	#4
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Re: Intake to Booster Hose I had the same problem. Ended up using 2002 gmc Yukon Denali hose and fitting. The 2003 Z71 4x4 was to small __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.