WELD Wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

yfs200p · 10-14-2003, 09:43 PM

Lets see all the trucks with weld's on them....

Izzy · 10-15-2003, 09:14 AM

Weld VR36 Scorpions.

gldevall · 10-15-2003, 09:56 AM

Do they still make the Weld's for our trucks? Haven't seen them in awhile.

LOHRTBT · 10-15-2003, 10:29 AM

Damn those are Phat Izzy!! hehe

Izzy · 10-15-2003, 10:46 AM

Quote:

Originally posted by LOHRTBT
Damn those are Phat Izzy!! hehe

I know. BTW I found the matching steering wheel and that and the wheels are going on the new project for a while.

PHOENIX · 10-15-2003, 12:13 PM

Weld Draglites

15x8s up front
15x10s out back
295/50/r15 all around

No longer have these on the truck.

PHOENIX · 10-15-2003, 12:14 PM

Forgot to attach image

bigblock73 · 10-15-2003, 12:23 PM

Quote:

Originally posted by PHOENIX
Weld Draglites

15x8s up front
15x10s out back
295/50/r15 all around

No longer have these on the truck.

Updated pics are required Eddie!!

What are you rollin on now?

-Jeff

kevhill85 · 10-15-2003, 01:09 PM

i'll get a pic today . with mine .. i have 15x10 out back and 15x8 up front

*1FaastC10* · 10-15-2003, 01:39 PM

Eddie, what was the BS on those wheels?

PHOENIX · 10-16-2003, 12:17 PM

Jeremy,
To be honest I can not recall the exact backspacing on those weld wheels. I believe they were 4" for the front and back wheels. But I still have 15x8 and 15x10, but they are Centerline telstars.

The front wheels have 4-1/2" bs and the rears are 4" bs.

Jeff,
If I ever wash my truck

Ill take some pictures with the new wheels. I have be ignoring the truck and spending time cleaning up the garage. I need to get a lot done on the truck though.

bigblock73 · 10-16-2003, 12:28 PM

Quote:

Originally posted by PHOENIX
Jeremy,
To be honest I can not recall the exact backspacing on those weld wheels. I believe they were 4" for the front and back wheels. But I still have 15x8 and 15x10, but they are Centerline telstars.

Eddie, I think your old 15X10 wheels were 3.5 rear. I have Pro Stars, 15X10, 15X7...and I am almost positive the rears are 3.5, any more and they will stick OUT of the wheel well...a no-no in my opinion.

-Jeff

kevhill85 · 10-16-2003, 01:19 PM

my back spaing was 5 1/4 that on my 15x10

bigblock73 · 10-16-2003, 01:40 PM

You know what, I got turned around..5.5 was the backspacing...duh!

Eddie, I believe that is what you had.

-Jeff

10-14-2003, 09:43 PM	#1
yfs200p E.H.F.D Engine #2 Join Date: Feb 2003 Location: East Hampton, NY Long Island Posts: 916	WELD Wheels Lets see all the trucks with weld's on them.... __________________ -NICK '72 K10 SWB Fleetside. Avocado Highlander 350-4speed-NP205 Frame Off Re-Creation '89 GMC V3500 C/C Flatbed Plow Truck 454/SM465/Np205 '15 Chevy 2500HD CCSB High Country Duramax '22 Tahoe Premier Duramax

10-15-2003, 09:56 AM	#3
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Do they still make the Weld's for our trucks? Haven't seen them in awhile. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

10-15-2003, 10:29 AM	#4
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Damn those are Phat Izzy!! hehe __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

10-15-2003, 12:13 PM	#6
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Weld Draglites 15x8s up front 15x10s out back 295/50/r15 all around No longer have these on the truck. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

10-15-2003, 12:14 PM	#7
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Forgot to attach image Attached Images __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

10-15-2003, 09:14 AM	#2
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	Weld VR36 Scorpions.

10-15-2003, 01:09 PM	#9
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i'll get a pic today . with mine .. i have 15x10 out back and 15x8 up front __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

10-15-2003, 01:39 PM	#10
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	Eddie, what was the BS on those wheels?

10-16-2003, 12:17 PM	#11
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Jeremy, To be honest I can not recall the exact backspacing on those weld wheels. I believe they were 4" for the front and back wheels. But I still have 15x8 and 15x10, but they are Centerline telstars. The front wheels have 4-1/2" bs and the rears are 4" bs. Jeff, If I ever wash my truck Ill take some pictures with the new wheels. I have be ignoring the truck and spending time cleaning up the garage. I need to get a lot done on the truck though. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

10-16-2003, 01:19 PM	#13
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	my back spaing was 5 1/4 that on my 15x10 __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

10-16-2003, 01:40 PM	#14
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	You know what, I got turned around..5.5 was the backspacing...duh! Eddie, I believe that is what you had. -Jeff

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.