The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-30-2017, 09:35 PM   #1
AnniesSS
Registered User
 
Join Date: Sep 2002
Location: Raleigh, NC, USA
Posts: 248
Barn Door Gasket/Weather stripping replacement

Hey guys.... Not a frequent poster, however, these forums have been helpful many times.... but I need some help.

I bought new gaskets/weather stripping for my barn doors and for the top of the doors on the body. These seem to all have glue holding them on, along with the push pins/clips. What did you use to remove this glue before reinstalling the new gaskets? Trying to get some info before I just into this project.

Thanks for your help!
Attached Images
 
__________________
Annie
1990 Chevrolet 454SS
1989 Chevrolet Suburban 2500 Silverado
AnniesSS is offline   Reply With Quote
Old 05-31-2017, 03:14 PM   #2
rideair
Registered User
 
Join Date: Jul 2009
Location: Front Royal Virginia
Posts: 243
Re: Barn Door Gasket/Weather stripping replacement

Just went through the same process with my tailgate version.

I personally got the old weather stripping off (not fun brittle broke off in small pieces), but found much of the glue/sealer under the gasket was still very sticky even after 30 years. On mine, I just scraped off the stuff that was no longer sticky leaving the good stuff still in place to help seal the new gasket along with the sealant I was using.

Figured, why remove something sticky when I'm just going to turn around and put something sticky right back on?

Enjoy
rideair is offline   Reply With Quote
Old 05-31-2017, 06:36 PM   #3
AnniesSS
Registered User
 
Join Date: Sep 2002
Location: Raleigh, NC, USA
Posts: 248
Re: Barn Door Gasket/Weather stripping replacement

Thanks!
__________________
Annie
1990 Chevrolet 454SS
1989 Chevrolet Suburban 2500 Silverado
AnniesSS is offline   Reply With Quote
Old 11-01-2019, 06:36 PM   #4
chris989
Registered User
 
Join Date: Dec 2011
Location: Boise, Idaho
Posts: 586
Quote:
Originally Posted by AnniesSS View Post
Hey guys.... Not a frequent poster, however, these forums have been helpful many times.... but I need some help.

I bought new gaskets/weather stripping for my barn doors and for the top of the doors on the body. These seem to all have glue holding them on, along with the push pins/clips. What did you use to remove this glue before reinstalling the new gaskets? Trying to get some info before I just into this project.

Thanks for your help!
What weather stripping did you buy? did it fit? I tried a set from Steele Rubber and it was a 3rd party item adn so stiff my doors would not close?

CHris
chris989 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:09 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com