Boyd Welding Side Fill Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KyleSeal** · 06-04-2017, 09:54 PM

About to give AZ Pro a call to place an order on a Boyd tank. I'm looking to get a side fill and put a gas flap in the side of the bed.

Are these tanks easy to use in the side fill configuration? Does it clear the bottom of the bed (fill neck to bed floor) easily and with wiggle room?

Also, do you have to remove any crossmembers to get the tank to get into spot or does it go into place easily?

Id like to avoid bed fill because if my tailgate on this truck ends up like my 84 I'll hate opening and closing it.

Pics would be very helpful as well as ideas.

Thanks in advance.

**Jcfcamaro** · 06-04-2017, 11:45 PM

Going to be watching this thread. I'm wanting to do the same on a 72 k10

greasemonkey · 06-05-2017, 06:54 AM

I have read a bunch of threads on this topic, I have a Boyd tank I bought last year but haven't installed due to lack of time and space...this is my favorite filler I have found, he did an outstanding job on it and I plan to do mine the same way.

http://67-72chevytrucks.com/vboard/s...postcount=2388

74baggedbug · 06-05-2017, 09:48 AM

Quote:

Originally Posted by greasemonkey

I have read a bunch of threads on this topic, I have a Boyd tank I bought last year but haven't installed due to lack of time and space...this is my favorite filler I have found, he did an outstanding job on it and I plan to do mine the same way.

http://67-72chevytrucks.com/vboard/s...postcount=2388

Mine is very similar to that setup.. previous owner did it.. I've been happy with it

06-04-2017, 09:54 PM	#1
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 893	Boyd Welding Side Fill Questions About to give AZ Pro a call to place an order on a Boyd tank. I'm looking to get a side fill and put a gas flap in the side of the bed. Are these tanks easy to use in the side fill configuration? Does it clear the bottom of the bed (fill neck to bed floor) easily and with wiggle room? Also, do you have to remove any crossmembers to get the tank to get into spot or does it go into place easily? Id like to avoid bed fill because if my tailgate on this truck ends up like my 84 I'll hate opening and closing it. Pics would be very helpful as well as ideas. Thanks in advance. __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809

06-04-2017, 11:45 PM	#2
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: Boyd Welding Side Fill Questions Going to be watching this thread. I'm wanting to do the same on a 72 k10

06-05-2017, 06:54 AM	#3
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	Re: Boyd Welding Side Fill Questions I have read a bunch of threads on this topic, I have a Boyd tank I bought last year but haven't installed due to lack of time and space...this is my favorite filler I have found, he did an outstanding job on it and I plan to do mine the same way. http://67-72chevytrucks.com/vboard/s...postcount=2388 __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.