TBI Has Anyone Used These

[Harley03joe]

TBI Has Anyone Used These Im Going To Go Tru My TBI Check The Injectors And Clean It Up, I Was Told That The Fuel Pressure Should Be 9 To 13 PSI
Let Me Know If Anyone Used These Parts OK
Thank You For Any Reply
Harley03joe




This fitting will replace the TBI inlet fuel nut and provide a place for your fuel pressure gauge attachment. Dimension of attachment is 1/8" NPT. Fitting comes with special OEM type teflon washer. You will be able to use your OEM fuel line.
Part # 62-FP
86'-95' TBI Fuel Pressure Adapter Fitting





This Tbi Adjustable Regulator is needed for stock and modified GM tbi engines. At 3/4 to WOT the computer uses a fixed program for max power. Therefore,since it is not reading the A/F ratio you may need more or less fuel for maximum power. This regulator let's you change what the computer can't.
Includes installation gaskets and instructions.
Part # 62-FR
86-95 GM TBI Fuel Adjustable Fuel Regulator (with gaskets)





86-95 GM TBI Fuel Pressure Gauge
Includes installation gaskets and instructions.
Part # 62-PG
86-95 GM TBI Fuel Gauge

[Brennan]

I have, multiple times. The adapter requires slight modifications to the hard fuel line , (just a slight tweak to the bend). One word of advice: keep a close eye on that fuel gauge, mine failed and puked gasoline all over the hot engine while driving. Scared me enough to install a gauge that used an electric sending unit.

[Harley03joe]

Originally Posted by Brennan

I have, multiple times. The adapter requires slight modifications to the hard fuel line , (just a slight tweak to the bend). One word of advice: keep a close eye on that fuel gauge, mine failed and puked gasoline all over the hot engine while driving. Scared me enough to install a gauge that used an electric sending unit.

Thank You For The Come Back, Boy That Was Fast.
I Will Check The Gage Often And Might Just Plug It Off After Its Installed
What Did You Think About This Item Does It Work Ok ??
And Thank You For The Fast Comeback
Harley03joe

This Tbi Adjustable Regulator is needed for stock and modified GM tbi engines. At 3/4 to WOT the computer uses a fixed program for max power. Therefore,since it is not reading the A/F ratio you may need more or less fuel for maximum power. This regulator let's you change what the computer can't.
Includes installation gaskets and instructions.
Part # 62-FR
86-95 GM TBI Fuel Adjustable Fuel Regulator (with gaskets)

[kwmech]

I would recommend reading this first, good information

http://tbichips.com/?page_id=73

[kalbert]

Originally Posted by kwmech

I would recommend reading this first, good information

http://tbichips.com/?page_id=73

Ditto.

[Harley03joe]

Originally Posted by kalbert

Ditto.

Sorry Kalbert
To Much For Me To Read And Understand, All I Wanted To Know Was Did Anyone Use >>>Part # 62-FR
86-95 GM TBI Fuel Adjustable Fuel Regulator (with gaskets) And What Did They Think .

Sorry But Thanks For Your Input
Harley03joe

[Brennan]

Originally Posted by Harley03joe

Thank You For The Come Back, Boy That Was Fast.
I Will Check The Gage Often And Might Just Plug It Off After Its Installed
What Did You Think About This Item Does It Work Ok ??
And Thank You For The Fast Comeback
Harley03joe

This Tbi Adjustable Regulator is needed for stock and modified GM tbi engines. At 3/4 to WOT the computer uses a fixed program for max power. Therefore,since it is not reading the A/F ratio you may need more or less fuel for maximum power. This regulator let's you change what the computer can't.
Includes installation gaskets and instructions.
Part # 62-FR
86-95 GM TBI Fuel Adjustable Fuel Regulator (with gaskets)

My application is different than most, my tbi system is heavily modified and custom tuned. My previous Truck was much closers to stock and did benefit from increasing the fuel pressure, (because the truck would run lean at WOT before the fuel pressure increase)

Hope this helps

[Harley03joe]

Originally Posted by Brennan

My application is different than most, my tbi system is heavily modified and custom tuned. My previous Truck was much closers to stock and did benefit from increasing the fuel pressure, (because the truck would run lean at WOT before the fuel pressure increase)

Hope this helps

Thanks For The Info

[Harley03joe]

Originally Posted by Brennan

My application is different than most, my tbi system is heavily modified and custom tuned. My previous Truck was much closers to stock and did benefit from increasing the fuel pressure, (because the truck would run lean at WOT before the fuel pressure increase)

Hope this helps

Thank You
And About FhotoBucket I Left Them & Went With Flicker
Harley03joe

[Harley03joe]

Originally Posted by Brennan

I have, multiple times. The adapter requires slight modifications to the hard fuel line , (just a slight tweak to the bend). One word of advice: keep a close eye on that fuel gauge, mine failed and puked gasoline all over the hot engine while driving. Scared me enough to install a gauge that used an electric sending unit.

Boy I'm Trying To Get The Fuel Line Lined Up Now Its Not As Easy As It Looks
Going To Work On It Again In The Morning
Thanks For Your Input
Harley03joe