The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-23-2017, 07:30 PM   #1
Jered1987
Registered User
 
Jered1987's Avatar
 
Join Date: Aug 2017
Location: Calhoun,ga
Posts: 139
1986 c20 revival

Hey everybody, I'm getting a 1986 c20 with 350 4 bolt engine and th400 tranny. My wife's grandfather is giving me the truck when we move down south the body is in excellent condition. The truck has been sitting for atleast 5-10 years but he starts it up every so often and drives it. The axle I'm guessing needs a rebuild because he said the spider gears are bad. I'm probably taking the truck to a shop to have the rear redone. What all does everyone recommend doing on it as I have a two hour trip going through atlanta. I know I'm getting new tires,tune up kit, belts, radiator hoses battery.
Jered1987 is offline   Reply With Quote
Old 08-23-2017, 09:37 PM   #2
MTCK
Registered User
 
MTCK's Avatar
 
Join Date: Dec 2009
Location: Fairbanks, AK
Posts: 1,830
Re: 1986 c20 revival

Welcome. Post some pics up. Sounds like a neat truck. Likely has a 9.5" semi floater, and if it needs work maybe consider a 10.5" full float rear from the salvage yard.
__________________
-Marcus

1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's
1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow
2022 Silverado 3500 L8T
Project Daily Driver
Project Heavy Hauler
Project Plow Truck
MTCK is offline   Reply With Quote
Old 08-23-2017, 10:10 PM   #3
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: 1986 c20 revival

Quote:
Originally Posted by MTCK View Post
Welcome. Post some pics up. Sounds like a neat truck. Likely has a 9.5" semi floater, and if it needs work maybe consider a 10.5" full float rear from the salvage yard.
x2 if the spiders gears are bad then the cost of fixing at shop price = crazy money .

14ff from heavy 3/4 ton swap in fairly easy and then never have to think about it again for the most part .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 08-23-2017, 10:29 PM   #4
Jered1987
Registered User
 
Jered1987's Avatar
 
Join Date: Aug 2017
Location: Calhoun,ga
Posts: 139
Re: 1986 c20 revival

Quote:
Originally Posted by sweetk30 View Post
x2 if the spiders gears are bad then the cost of fixing at shop price = crazy money .

14ff from heavy 3/4 ton swap in fairly easy and then never have to think about it again for the most part .
Yeah I was thinking about it. Most of it had to do with the lack of time and i didn't want to get a dud 2nd axle and break down on the highway with my pregnant wife. But for sure I need all the money I can scrounge right now.
Jered1987 is offline   Reply With Quote
Old 08-23-2017, 09:50 PM   #5
Jered1987
Registered User
 
Jered1987's Avatar
 
Join Date: Aug 2017
Location: Calhoun,ga
Posts: 139
Re: 1986 c20 revival

I'll try to post some pics of the truck we are moving down to georgia from ny to be be near my wife's family in two weeks
Jered1987 is offline   Reply With Quote
Old 08-24-2017, 09:28 AM   #6
cadillac_al
Registered User
 
Join Date: Oct 2013
Location: Maine
Posts: 2,376
Re: 1986 c20 revival

Don't those c20's have ff 14 bolts? Those never fail. I would pull the cover and have a look for $0 cost.
__________________
76 Chevy K20
76 GMC K15
77 Chevy C10
77 Chevy K10
cadillac_al is offline   Reply With Quote
Old 08-24-2017, 03:23 PM   #7
Dead Parrot
Registered User
 
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,612
Re: 1986 c20 revival

#1. Don't have your pregnant wife in the truck with you when you are driving the truck back. That way, if the truck breaks down, she is safe at home or with her parents.

If you can, find out what axle it has now and buy rear end oil and a new gasket. Inspect the gears before you hit the highway. Highway driving is fairly easy on spider gears as you are mostly going straight. If they are in decent shape, just drive it to your new home.

Price renting a vehicle hauling trailer and tow vehicle and just haul the truck to its new home. Will let you fix it local to you and not risk a road side breakdown.

Add to your list of stuff: A gallon or 2 of antifreeze, oil change + filter, new wiper blades, and a quart or 2 of ATF.
Dead Parrot is offline   Reply With Quote
Old 08-24-2017, 07:32 PM   #8
Jered1987
Registered User
 
Jered1987's Avatar
 
Join Date: Aug 2017
Location: Calhoun,ga
Posts: 139
Re: 1986 c20 revival

Quote:
Originally Posted by Dead Parrot View Post
#1. Don't have your pregnant wife in the truck with you when you are driving the truck back. That way, if the truck breaks down, she is safe at home or with her parents.

If you can, find out what axle it has now and buy rear end oil and a new gasket. Inspect the gears before you hit the highway. Highway driving is fairly easy on spider gears as you are mostly going straight. If they are in decent shape, just drive it to your new home.

Price renting a vehicle hauling trailer and tow vehicle and just haul the truck to its new home. Will let you fix it local to you and not risk a road side breakdown.

Add to your list of stuff: A gallon or 2 of antifreeze, oil change + filter, new wiper blades, and a quart or 2 of ATF.
My wife's grandfather has a newer Silverado 1500 and a car trailer was thinking about that but sometimes he can be rather moody. He didn't know the gear ratio. And he said that the truck is good enough around town, but not for the couple hour drive from stockbridge to Calhoun georgia. Are axles that bad to tear apart and redo? They looked pretty straight forward but didn't know if the shims and what not make them horrible to do .on a side note, anywhere in particular i should get better quality brake tools or will autozone/ Napa tools be good enough?
Jered1987 is offline   Reply With Quote
Old 08-24-2017, 06:04 PM   #9
donut
Registered User
 
donut's Avatar
 
Join Date: Aug 2009
Location: S.C.
Posts: 1,593
Re: 1986 c20 revival

I'm with Dead Parrot.

I know you said money is an issue, but with everything your up against, paying a wrecker to haul it to your house will at least buy you some time. More if something breaks...
__________________
'86 C-30 dually, 454/tbh400
'73 K-20 350/350/205 (sold )

I'm kinda like duct tape- no real purpose, but handy to have around.
donut is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com