1972 Chevy Short Bed Driveshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cam1968rsss** · 11-10-2017, 09:57 AM

Hi, would anyone know if a one piece driveshaft out a short bed 1973, with a turbo 350 trans (short tail shaft) would fit a 1972 with the same transmission?

Thanks
Eddie

**special-K** · 11-11-2017, 08:53 AM

Honestly, with driveshaft lengths, I never trust anything but measuring yoke to yoke on the truck and driveshaft. I have gotten lucky and had shafts just work when doing swaps to measure and have one made longer or cut one shorter. It "should" work since frame length differences are all ahead of the cab, but does the engine sit more forward?

How does your truck sit now? Engine/trans in position and rear mounted? I'm waiting till I set engine/trans in the frame before thinking anything about a driveshaft on my shortbed. I'll do one piece, too.

Mike C · 11-11-2017, 08:59 AM

What Tim said.

But more specifically, NO. The drivetrain is mounted in a different location, the wheelbase is different, (117.5 versus 115). And more importantly, is your truck lowered? A 1 piece shaft will not work with the 67-72 trailing arm crossmember (and it is in leaf spring trucks too) with stock height suspension.

diggerbob · 11-11-2017, 05:49 PM

Quote:

Originally Posted by Mike C

What Tim said.

But more specifically, NO. The drivetrain is mounted in a different location, the wheelbase is different, (117.5 versus 115). And more importantly, is your truck lowered? A 1 piece shaft will not work with the 67-72 trailing arm crossmember (and it is in leaf spring trucks too) with stock height suspension.

What? I have a one piece drive shaft in my 70 short bed and my suspension is at stock height.

Mike C · 11-11-2017, 09:22 PM

Wouldn't work in m y 69. At droop the driveshaft would have hit the crossmember. I guess a good example of not all trucks sit at same stock height.

**special-K** · 11-12-2017, 09:36 AM

Quote:

Originally Posted by diggerbob

What? I have a one piece drive shaft in my 70 short bed and my suspension is at stock height.

How close is the shaft to the cross member? A comfortable distance to allow for droop? Most times a 2wd rear doesn't do much drooping with compressing (from weight) being the main concern. Just curious how the clearance is. A assume the truck originally had a 2pc shaft, correct?

11-10-2017, 09:57 AM	#1
Cam1968rsss Senior Member Join Date: Oct 2010 Location: Zavalla, TX Posts: 427	1972 Chevy Short Bed Driveshaft Hi, would anyone know if a one piece driveshaft out a short bed 1973, with a turbo 350 trans (short tail shaft) would fit a 1972 with the same transmission? Thanks Eddie

11-11-2017, 08:53 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1972 Chevy Short Bed Driveshaft Honestly, with driveshaft lengths, I never trust anything but measuring yoke to yoke on the truck and driveshaft. I have gotten lucky and had shafts just work when doing swaps to measure and have one made longer or cut one shorter. It "should" work since frame length differences are all ahead of the cab, but does the engine sit more forward? How does your truck sit now? Engine/trans in position and rear mounted? I'm waiting till I set engine/trans in the frame before thinking anything about a driveshaft on my shortbed. I'll do one piece, too. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 11-11-2017 at 02:07 PM.

11-11-2017, 08:59 AM	#3
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,728	Re: 1972 Chevy Short Bed Driveshaft What Tim said. But more specifically, NO. The drivetrain is mounted in a different location, the wheelbase is different, (117.5 versus 115). And more importantly, is your truck lowered? A 1 piece shaft will not work with the 67-72 trailing arm crossmember (and it is in leaf spring trucks too) with stock height suspension. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

11-11-2017, 09:22 PM	#5
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,728	Re: 1972 Chevy Short Bed Driveshaft Wouldn't work in m y 69. At droop the driveshaft would have hit the crossmember. I guess a good example of not all trucks sit at same stock height. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.