|
|
|
11-25-2017, 07:43 PM
|
#1 |
|
Registered User
Join Date: Feb 2015
Location: Meridian, Idaho
Posts: 11
|
69 c10 hood pops open
Recently my hood will pop open when hitting a small bump. It only pops loose and is still latched but not fully closed. I don't see any adjustments on it. Any suggestions?
|
|
|
|
11-25-2017, 07:47 PM
|
#2 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: 69 c10 hood pops open
The hood pin in the center. Tighten it up and take the rubber stoppers on each side on the core support and run them in to take the pressure off the hood.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 11-25-2017 at 07:53 PM. |
|
|
|
|
11-27-2017, 10:22 PM
|
#3 |
|
Registered User
Join Date: Feb 2015
Location: Meridian, Idaho
Posts: 11
|
Re: 69 c10 hood pops open
Thanks for the help! I will give that a try this weekend.
Much appreciated |
|
|
|
|
11-28-2017, 06:53 AM
|
#4 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: 69 c10 hood pops open
Quote:
You may not need to do anything but screw the 2 bumper's in to let the hood sit all the way down also. I would try that first.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
 |
| Bookmarks |
| Tags |
| 69 c10, hood, latch |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
