trashed floorboard - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mutant-jimbo · 11-01-2003, 06:26 PM

i ve got cancer of the floor baord. is there anywhere i can buy a whole new piece (from behind the seats to the firewall)??
thanks for any help, the only thing i can find by a search are smaller sections.

mutant-jimbo · 11-02-2003, 12:11 AM

just thought id show the other side, its not as bad. also, the rot is only on the upper part of the floor board, not the under side?? this completely opposite of my other pretty wierd? oh si!!

79cheyenne4x · 11-02-2003, 08:54 PM

A company by the name of "LMC Truck" sells these panels. I recently purchased panls from them for the floor of my '79 Blazer. I have not yet installed them, they're for a winter project. But, the quality is excellent, and the LMC service is first class. Check out their website at: www.LMCTRUCK.com
They have a great catelog too, plus orders over $500 get free freight. I ordered a whole bunch of odds and ends for a total of $503, and my order arrived in less than a week.

littlebubba · 11-03-2003, 12:15 AM

I don't know how close you are to any salvage yards in your area, but I would think down that way you should be able to come up with a pretty good piece to replace yours outta a salvage vehicle. Just have to have it welded in after that, which your going to do anyway if you buy patch panels. I'm sure if your Chevy dealer can still get that panel if it hasn't been discontinued you will pay good money for it, but it doesn't hurt or cost money to call and ask them.

mutant-jimbo · 11-03-2003, 12:26 AM

i have a hard time fining my style of blazer. i think they changed the bed floor in 78, making it deeper, for the rear seat occupants feat. i was kinda wondering if a regular cab truck floor would be similar?

Tink · 11-03-2003, 08:14 AM

I used floor pans from JC Whitney for my 76. Some cutting had to be done to get them to fit and they did not go all they way back. I used fiberglass to fill in the other holes.

Jonboy · 11-03-2003, 10:15 AM

The Blazer floor is unique to it, and the 73-77 floors are different. the pickups have a large hump to clear the fuel tanks, and the suburban has the same floor for some reason.

mutant-jimbo · 11-03-2003, 08:58 PM

Quote:

Originally posted by Jonboy
The Blazer floor is unique to it, and the 73-77 floors are different. the pickups have a large hump to clear the fuel tanks, and the suburban has the same floor for some reason.

the same as the blazer or the truck?

Jonboy · 11-04-2003, 09:31 AM

the same as a pickup. The Blazer floors are flat, and are the only full size Chevy truck like that. I am not sure if the front portion of the floorpan is the same after 77 or not, but if I remember right, my 75 had a slope going back to the rear cargo floor, while the newer ones drop straight down.

mutant-jimbo · 11-04-2003, 08:32 PM

on both my Jimmy and Blazer (75's) the bed is flat all the way to the back of the front seat. then it drops staright down to floorbaord level. that stayed the same up to '77. In '78 it went to a larger floor board area. so the rear seat occupants didnt have to rest their chins on their knees.
so i guess ill pose one more question. if the boards are differant in the fullsize truck, where does the gas hump start? after the back of the seat or under? if it starts after (to the rear of) then i could cut the whole thing out and put it in the jimmy anjd trim til it fits.

Jonboy · 11-08-2003, 01:29 AM

the hump starts where the front seat bracket bolts to it. Your Blazer should have a seat bracket that provides ~6 inches of lift. The truck seat brackets are about 1" tall.

11-01-2003, 06:26 PM	#1
mutant-jimbo Registered User Join Date: Nov 2003 Location: Joplin, Mo. Posts: 166	trashed floorboard i ve got cancer of the floor baord. is there anywhere i can buy a whole new piece (from behind the seats to the firewall)?? thanks for any help, the only thing i can find by a search are smaller sections. Attached Images

11-02-2003, 12:11 AM	#2
mutant-jimbo Registered User Join Date: Nov 2003 Location: Joplin, Mo. Posts: 166	just thought id show the other side, its not as bad. also, the rot is only on the upper part of the floor board, not the under side?? this completely opposite of my other pretty wierd? oh si!! Attached Images __________________ "Texas is an outrage when your husband is dead, Texas is an outrage when they pick up his head, Texas is the reason why the presidents dead"-bullet by The Misfits

11-02-2003, 08:54 PM	#3
79cheyenne4x Registered User Join Date: Apr 2003 Posts: 12	aftermarket floor panels A company by the name of "LMC Truck" sells these panels. I recently purchased panls from them for the floor of my '79 Blazer. I have not yet installed them, they're for a winter project. But, the quality is excellent, and the LMC service is first class. Check out their website at: www.LMCTRUCK.com They have a great catelog too, plus orders over $500 get free freight. I ordered a whole bunch of odds and ends for a total of $503, and my order arrived in less than a week.

11-03-2003, 12:15 AM	#4
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 321	Salvage yards I don't know how close you are to any salvage yards in your area, but I would think down that way you should be able to come up with a pretty good piece to replace yours outta a salvage vehicle. Just have to have it welded in after that, which your going to do anyway if you buy patch panels. I'm sure if your Chevy dealer can still get that panel if it hasn't been discontinued you will pay good money for it, but it doesn't hurt or cost money to call and ask them.

11-03-2003, 12:26 AM	#5
mutant-jimbo Registered User Join Date: Nov 2003 Location: Joplin, Mo. Posts: 166	i have a hard time fining my style of blazer. i think they changed the bed floor in 78, making it deeper, for the rear seat occupants feat. i was kinda wondering if a regular cab truck floor would be similar? __________________ "Texas is an outrage when your husband is dead, Texas is an outrage when they pick up his head, Texas is the reason why the presidents dead"-bullet by The Misfits

11-03-2003, 08:14 AM	#6
Tink Registered User Join Date: May 2002 Location: VA Posts: 1,337	I used floor pans from JC Whitney for my 76. Some cutting had to be done to get them to fit and they did not go all they way back. I used fiberglass to fill in the other holes. __________________ 69 Chevy C10 88 Sierra 02 2500 Suburban And too many S10s to list!

11-03-2003, 10:15 AM	#7
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	The Blazer floor is unique to it, and the 73-77 floors are different. the pickups have a large hump to clear the fuel tanks, and the suburban has the same floor for some reason. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-04-2003, 09:31 AM	#9
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	the same as a pickup. The Blazer floors are flat, and are the only full size Chevy truck like that. I am not sure if the front portion of the floorpan is the same after 77 or not, but if I remember right, my 75 had a slope going back to the rear cargo floor, while the newer ones drop straight down. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-04-2003, 08:32 PM	#10
mutant-jimbo Registered User Join Date: Nov 2003 Location: Joplin, Mo. Posts: 166	on both my Jimmy and Blazer (75's) the bed is flat all the way to the back of the front seat. then it drops staright down to floorbaord level. that stayed the same up to '77. In '78 it went to a larger floor board area. so the rear seat occupants didnt have to rest their chins on their knees. so i guess ill pose one more question. if the boards are differant in the fullsize truck, where does the gas hump start? after the back of the seat or under? if it starts after (to the rear of) then i could cut the whole thing out and put it in the jimmy anjd trim til it fits. __________________ "Texas is an outrage when your husband is dead, Texas is an outrage when they pick up his head, Texas is the reason why the presidents dead"-bullet by The Misfits

11-08-2003, 01:29 AM	#11
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	the hump starts where the front seat bracket bolts to it. Your Blazer should have a seat bracket that provides ~6 inches of lift. The truck seat brackets are about 1" tall. __________________ 1974 Jimmy- 5.3/4L80e/NP241

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.