Exhaust Design LS conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**paul mora** · 01-02-2018, 04:12 PM

I have 2006 6.0 I am installing in a suburban and a Blazer build I have not started. I have one set of stock exhaust that was on the 6.0 and a set so Sanderson headers that I have mocked up on the Suburban. I want to save the headers for the Blazer and use the stock exhaust on the Suburban.

I would like to coat the stock exhaust with a high temp coating and run them without the heat shields .

Does anyone see anything wrong with the exhaust plan, with the fit or no heat shields.

gringoloco · 01-02-2018, 04:19 PM

Stock truck manifolds usually do not fit without cutting the framerails. F-body, trailblazer SS, or Camaro LS3 are known to fit. Hooker or CPP exhaust manifolds also fit well, but are slightly more expensive

**paul mora** · 01-02-2018, 10:43 PM

I have two set one might be Camaro. Does any know the difference based on the part number stramped on the side

gringoloco · 01-02-2018, 11:32 PM

Top is a truck manifold, bottom is Camaro LS3

**paul mora** · 01-03-2018, 01:13 PM

Will the Camaro work without cutting the frame and leaving the heat shields off

gringoloco · 01-03-2018, 01:43 PM

Yes, they are a known good fit

**Hart_Rod** · 01-04-2018, 02:23 PM

Quote:

Originally Posted by paul mora

Will the Camaro work without cutting the frame and leaving the heat shields off

They work great!

Quote:

Originally Posted by gringoloco

Yes, they are a known good fit

+1

01-02-2018, 04:12 PM	#1
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Exhaust Design LS conversion I have 2006 6.0 I am installing in a suburban and a Blazer build I have not started. I have one set of stock exhaust that was on the 6.0 and a set so Sanderson headers that I have mocked up on the Suburban. I want to save the headers for the Blazer and use the stock exhaust on the Suburban. I would like to coat the stock exhaust with a high temp coating and run them without the heat shields . Does anyone see anything wrong with the exhaust plan, with the fit or no heat shields. __________________ Pulatoy

01-02-2018, 04:19 PM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Exhaust Design LS conversion Stock truck manifolds usually do not fit without cutting the framerails. F-body, trailblazer SS, or Camaro LS3 are known to fit. Hooker or CPP exhaust manifolds also fit well, but are slightly more expensive __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-02-2018, 10:43 PM	#3
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: Exhaust Design LS conversion I have two set one might be Camaro. Does any know the difference based on the part number stramped on the side Attached Images __________________ Pulatoy

01-02-2018, 11:32 PM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Exhaust Design LS conversion Top is a truck manifold, bottom is Camaro LS3 __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-03-2018, 01:13 PM	#5
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: Exhaust Design LS conversion Will the Camaro work without cutting the frame and leaving the heat shields off __________________ Pulatoy

01-03-2018, 01:43 PM	#6
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Exhaust Design LS conversion Yes, they are a known good fit __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.