|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
01-29-2018, 11:50 AM
|
#1 |
|
Registered User
Join Date: Oct 2011
Location: hudson,wi
Posts: 805
|
upper control arm mounting hardware?
What all goes on the mounting studs before the upper control arms go onto them? I know there's the shims and another piece that's flat on one side and curved on the other( which goes right against the control arm shaft) ...... but is there anything else??
Any pics would be appreciated if you've got them...... the LMC truck catalog shows part 22 and 23 but not sure what they do??
__________________
RIZ  81 C10 short box 82 K5 Blazer Last edited by riz; 01-29-2018 at 03:37 PM. |
|
|
|
01-30-2018, 09:20 AM
|
#2 |
|
Registered User
Join Date: Oct 2011
Location: hudson,wi
Posts: 805
|
Re: upper control arm mounting hardware?
to answer my own question..... the only parts that go on the upper control arm studs are the shims and the flat back/ curved front parts... then the control arm.
LMC parts 22 and 23 are washers and nuts to hold the bracket to the frame.
__________________
RIZ 81 C10 short box 82 K5 Blazer Last edited by riz; 01-30-2018 at 09:26 AM. |
|
|
|
|
01-30-2018, 03:30 PM
|
#3 |
|
Registered User
Join Date: Dec 2011
Location: Massachusetts
Posts: 245
|
Re: upper control arm mounting hardware?
Yup
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
