66 c10 glove box emblem install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Afirehawk1 · 02-04-2018, 01:09 PM

How is everyone doing this besides glueing?
Seems like there should be a clip or something to hold in place.

**The Rocknrod** · 02-04-2018, 01:30 PM

They are called tube nuts, see this:
http://67-72chevytrucks.com/vboard/s...5&postcount=26
And I think these are the same thing, couldnt find people that will sell just four or five - https://www.ebay.com/itm/25-pcs-scri...BaCMkA&vxp=mtr

Afirehawk1 · 02-04-2018, 01:34 PM

Quote:

Originally Posted by The Rocknrod

That’s it
Thanks

oldusafmsgt · 02-06-2018, 10:36 AM

I cut the studs off and used 3M trim tape. Still on there 5 years later.

**The Rocknrod** · 02-06-2018, 12:41 PM

Quote:

Originally Posted by oldusafmsgt

I cut the studs off and used 3M trim tape. Still on there 5 years later.

Ya I was thinking of keeping the studs and still using the tape.

I'm not sure how a plastic aftermarket emblem will do with the tube nuts.

**jayoldschool** · 02-06-2018, 06:27 PM

Two dabs of Ultra Black, it's not going anywhere.

**The Rocknrod** · 02-06-2018, 08:47 PM

Quote:

Originally Posted by jayoldschool

Two dabs of Ultra Black, it's not going anywhere.

Link? All I find is tape, like duct etc.

**jayoldschool** · 02-06-2018, 10:59 PM

Any gasket maker or silicone will work. I use this because I have it.

Llay R. Rac · 02-06-2018, 08:28 PM

does anyone know if the original emblems were plastic?

**jayoldschool** · 02-06-2018, 08:30 PM

They were.

vince1 · 02-07-2018, 03:40 AM

And who sells the emblem?

**mongocanfly** · 02-07-2018, 04:56 AM

02-04-2018, 01:09 PM	#1
Afirehawk1 Registered User Join Date: Feb 2016 Location: Valrico, Florida Posts: 661	66 c10 glove box emblem install How is everyone doing this besides glueing? Seems like there should be a clip or something to hold in place.

02-04-2018, 01:30 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 66 c10 glove box emblem install They are called tube nuts, see this: http://67-72chevytrucks.com/vboard/s...5&postcount=26 And I think these are the same thing, couldnt find people that will sell just four or five - https://www.ebay.com/itm/25-pcs-scri...BaCMkA&vxp=mtr __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 02-04-2018 at 01:42 PM.

02-06-2018, 10:36 AM	#4
oldusafmsgt Registered User Join Date: May 2011 Location: Jasper, AL Posts: 224	Re: 66 c10 glove box emblem install I cut the studs off and used 3M trim tape. Still on there 5 years later. __________________ 1960 Chevy Apache10 Short Fleetside 1961 Chevy Apache10 Short Fleetside 1961 Chevy Apache20 Fleetside 1963 Chevy C10 Short Fleetside 1965 Chevy C10 Short Stepside 1965 Chevy C10 Long Fleetside 1966 GMC 1000 Long Fleetside 1966 Chevy C10 Short Fleetside

02-06-2018, 06:27 PM	#6
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,187	Re: 66 c10 glove box emblem install Two dabs of Ultra Black, it's not going anywhere.

02-06-2018, 10:59 PM	#8
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,187	Re: 66 c10 glove box emblem install Any gasket maker or silicone will work. I use this because I have it.

02-06-2018, 08:28 PM	#9
Llay R. Rac Registered User Join Date: Jul 2016 Location: Arizona Posts: 324	Re: 66 c10 glove box emblem install does anyone know if the original emblems were plastic? __________________ 1965 Suburban, 2 wd.,292, 4-speed. proudly owned and operated since Valentines day 1969.

02-06-2018, 08:30 PM	#10
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,187	Re: 66 c10 glove box emblem install They were.

02-07-2018, 03:40 AM	#11
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,170	Re: 66 c10 glove box emblem install And who sells the emblem?

02-07-2018, 04:56 AM	#12
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,692	Re: 66 c10 glove box emblem install looks like everbody sells them...heres one...https://www.classicindustries.com/pr...ts/cx1071.html and another...https://www.classicparts.com/1964-66...SABEgIKlfD_BwE and more...https://www.ebay.com/i/152418352831?chn=ps __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.