Cast Headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

taclem · 04-17-2018, 05:10 PM

will the headers from a 67-72 small block fit our 60-66 sbc with manual transmission. I have been looking in wrecking yards and for sale sites for stock cast headers for some time and finally found a set of newer style yesterday but want to make sure they will fit. These are the ones I am talkjng about.

Thanks, taclem

**Captainfab** · 04-18-2018, 01:12 AM

Those exhaust manifolds should work. You'll just have to make sure the exhaust pipe doesn't interfere with the bottom arm of the clutch bellcrank. I'm thinking there should be plenty of room, but just make sure.

taclem · 04-18-2018, 01:39 AM

Thanks Captain.

**The Rocknrod** · 06-09-2021, 11:54 AM

Old thread but I just found these, maybe you've seen them before?. 1-5/8" primary and 2-1/2" outlet:
https://www.holley.com/products/exha.../parts/8525HKR

Ziegelsteinfaust · 06-09-2021, 12:29 PM

Circle track guys are found if the 1 ton or above vortec 350 exhaust manifolds.

They look alot like standard manifolds but flow a bit better. Especially with the flange opened up.

SCOTI · 06-16-2021, 05:52 PM

Quote:

Originally Posted by The Rocknrod

Old thread but I just found these, maybe you've seen them before?. 1-5/8" primary and 2-1/2" outlet:
https://www.holley.com/products/exha.../parts/8525HKR

I've always thought Hooker should do a SBC/BBC versions of their cast manifolds w/their LS swap units being so popular. I had no idea they were actually available so thank for providing the info! Gotta' love that plug clearance w/the 1 5/8 primary & you get the Vette sized outlet. Decent price as well....

**pdxhall** · 06-16-2021, 07:20 PM

I've got the cast iron tru-rams on mine and I've got no complaints.

SCOTI · 06-16-2021, 10:55 PM

Quote:

Originally Posted by pdxhall

I've got the cast iron tru-rams on mine and I've got no complaints.

I have the same ones on my sbc motivated 64.

LostMy65 · 06-09-2021, 09:34 PM

2.25 Rams horn also is an option.

64shortbox · 06-13-2021, 01:29 AM

Here's some neat Ram Horns from Speedway

https://www.speedwaymotors.com/Flowt...haust+manifold

AcampoDave · 06-16-2021, 07:30 PM

^^^ Bravo, Looks great!^^^ nothing against the LS guys but I love a sweet old school small block.

04-17-2018, 05:10 PM	#1
taclem Registered User Join Date: Aug 2009 Location: Preston, ID Posts: 123	Cast Headers will the headers from a 67-72 small block fit our 60-66 sbc with manual transmission. I have been looking in wrecking yards and for sale sites for stock cast headers for some time and finally found a set of newer style yesterday but want to make sure they will fit. These are the ones I am talkjng about. Thanks, taclem Attached Images

04-18-2018, 01:12 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Cast Headers Those exhaust manifolds should work. You'll just have to make sure the exhaust pipe doesn't interfere with the bottom arm of the clutch bellcrank. I'm thinking there should be plenty of room, but just make sure. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-18-2018, 01:39 AM	#3
taclem Registered User Join Date: Aug 2009 Location: Preston, ID Posts: 123	Re: Cast Headers Thanks Captain.

06-09-2021, 11:54 AM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Cast Headers Old thread but I just found these, maybe you've seen them before?. 1-5/8" primary and 2-1/2" outlet: https://www.holley.com/products/exha.../parts/8525HKR Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 06-10-2021 at 08:04 AM.

06-09-2021, 12:29 PM	#5
Ziegelsteinfaust Registered User Join Date: Dec 2012 Location: Temple City Posts: 3,628	Re: Cast Headers Circle track guys are found if the 1 ton or above vortec 350 exhaust manifolds. They look alot like standard manifolds but flow a bit better. Especially with the flange opened up.

06-16-2021, 07:20 PM	#7
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,084	Re: Cast Headers I've got the cast iron tru-rams on mine and I've got no complaints. Attached Images __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

06-09-2021, 09:34 PM	#9
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Cast Headers 2.25 Rams horn also is an option. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

06-13-2021, 01:29 AM	#10
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 734	Re: Cast Headers Here's some neat Ram Horns from Speedway https://www.speedwaymotors.com/Flowt...haust+manifold

06-16-2021, 07:30 PM	#11
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,778	Re: Cast Headers ^^^ Bravo, Looks great!^^^ nothing against the LS guys but I love a sweet old school small block.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.