65 C10 FUEL SENDER RATING 30 or 90 OHMS ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1BAD65 · 08-25-2018, 01:11 PM

Need a little help here guys.

1965 C10 LWB converted to SWB

Original gauge cluster with original fuel gauge.

I removed the tank behind the seat and scrapped it years ago, so I no longer have the original fuel sender

Just ordered a new under bed tank from Tanks Inc. and now need to order the correct fuel sender for the stock fuel gauge.
I need to know if the 65 C10 trucks came with a 0-30 or 0-90 ohm fuel sender.

Originally the truck came with an inline 6 cyl engine, not sure if you need that info but just in case.

I have searched here and get conflicting information. Some threads say all GM vehicles are 0-90 some threads say 0-30 for certain years.

Is there a way to pull the gauge cluster and test the fuel gauge without power?

The truck is in pieces since this is a frame off restoration

I do have a Snap On battery charger if I need power or I can use a standard car battery from my daily driver.

Any help or links is GREATLY APPRECIATED

Thanks

**The Rocknrod** · 08-25-2018, 03:30 PM

Sending units are 30 ohm.

vin63 · 08-25-2018, 06:15 PM

Yep, the fuel level gauge in the instrument cluster reads a 0 ohm empty to 30 ohm full signal.

1BAD65 · 08-25-2018, 07:25 PM

@TheRocknRod and @ Vin63

THANK YOU !!
YOU GUYS ARE AWESOME!!

08-25-2018, 01:11 PM	#1
1BAD65 Registered User Join Date: Jan 2012 Location: Madera,CA Posts: 111	65 C10 FUEL SENDER RATING 30 or 90 OHMS ?? Need a little help here guys. 1965 C10 LWB converted to SWB Original gauge cluster with original fuel gauge. I removed the tank behind the seat and scrapped it years ago, so I no longer have the original fuel sender Just ordered a new under bed tank from Tanks Inc. and now need to order the correct fuel sender for the stock fuel gauge. I need to know if the 65 C10 trucks came with a 0-30 or 0-90 ohm fuel sender. Originally the truck came with an inline 6 cyl engine, not sure if you need that info but just in case. I have searched here and get conflicting information. Some threads say all GM vehicles are 0-90 some threads say 0-30 for certain years. Is there a way to pull the gauge cluster and test the fuel gauge without power? The truck is in pieces since this is a frame off restoration I do have a Snap On battery charger if I need power or I can use a standard car battery from my daily driver. Any help or links is GREATLY APPRECIATED Thanks

08-25-2018, 03:30 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 65 C10 FUEL SENDER RATING 30 or 90 OHMS ?? Sending units are 30 ohm. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 08-25-2018 at 03:36 PM.

08-25-2018, 06:15 PM	#3
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: 65 C10 FUEL SENDER RATING 30 or 90 OHMS ?? Yep, the fuel level gauge in the instrument cluster reads a 0 ohm empty to 30 ohm full signal. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

08-25-2018, 07:25 PM	#4
1BAD65 Registered User Join Date: Jan 2012 Location: Madera,CA Posts: 111	Re: 65 C10 FUEL SENDER RATING 30 or 90 OHMS ?? @TheRocknRod and @ Vin63 THANK YOU !! YOU GUYS ARE AWESOME!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.