|
Fleetside rebuild
Hey guys I’m currently trying to rebuild my fleetside bed panels. They were rotted out pretty good around the rear support bracket, attachment areas. Previous owner had done the old bubblegum/flashing hodgepodge repair to these, so I’m kind of moving forward blindly. I have the panels separated and started making patch panels for these areas, was hoping somebody on here could help with some measurements for the bolt hole locations in this area or if anybody has a picture of the bedsides properly fitting the rear crossmember that would be super helpful.
Thanks,
Brian
|
09-13-2018, 10:15 AM
Hybrid Mode
