NJ WTB Need lower clutch rod - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 10-22-2018, 07:00 PM

Finally putting together some of the last pieces of my 65 project only to find out I have the wrong clutch fork push rod. See pic below of the part I need (not the z bar, just the rod).

If any one has one please post pic & price shipping to 08753.

Really appreciate any help on this part.

Thanks
Scott

**PGSigns** · 10-23-2018, 07:41 AM

Scott I will look tonight. I just pulled the entire setup off a GMC that I am parting.
Jimmy

**ScottH** · 10-23-2018, 09:33 AM

Thanks Jimmy

**PGSigns** · 10-24-2018, 06:28 AM

Scott I have a couple in a box and do you have a length to make sure I have the correct one?
Jimmy

**ScottH** · 10-24-2018, 12:04 PM

Jimmy, part of my problem is I'm not sure of the length. When I got the 65 a PO had installed a V8 in the forward position. He then modified (that's being nice, hacked is more like it) the clutch linkage, floor, etc. to work in the wrong position. I put the engine in the rear position where its supposed to be.

Long story short the rod that was in the truck is now way too short. I did a quick measurement & a best guess is around 12" (give or take) should work.

Sorry 4 the long explanation, hope that helps.

Thanks
Scott

**PGSigns** · 10-25-2018, 06:55 AM

I should have it. I have 4 in the box and will get pictures of the best one They are all stock stuff.
Jimmy

**ScottH** · 11-10-2018, 05:43 PM

still looking

**PGSigns** · 11-10-2018, 06:41 PM

Scott I have another one. Just got real busy and forgot to text you back. Will get you pictures in the morning.
Jimmy

10-22-2018, 07:00 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	WTB Need lower clutch rod Finally putting together some of the last pieces of my 65 project only to find out I have the wrong clutch fork push rod. See pic below of the part I need (not the z bar, just the rod). If any one has one please post pic & price shipping to 08753. Really appreciate any help on this part. Thanks Scott Attached Images __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-23-2018, 07:41 AM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: WTB Need lower clutch rod Scott I will look tonight. I just pulled the entire setup off a GMC that I am parting. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-23-2018, 09:33 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB Need lower clutch rod Thanks Jimmy __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-24-2018, 06:28 AM	#4
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: WTB Need lower clutch rod Scott I have a couple in a box and do you have a length to make sure I have the correct one? Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-24-2018, 12:04 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB Need lower clutch rod Jimmy, part of my problem is I'm not sure of the length. When I got the 65 a PO had installed a V8 in the forward position. He then modified (that's being nice, hacked is more like it) the clutch linkage, floor, etc. to work in the wrong position. I put the engine in the rear position where its supposed to be. Long story short the rod that was in the truck is now way too short. I did a quick measurement & a best guess is around 12" (give or take) should work. Sorry 4 the long explanation, hope that helps. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-25-2018, 06:55 AM	#6
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: WTB Need lower clutch rod I should have it. I have 4 in the box and will get pictures of the best one They are all stock stuff. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

11-10-2018, 05:43 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB Need lower clutch rod still looking __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-10-2018, 06:41 PM	#8
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: WTB Need lower clutch rod Scott I have another one. Just got real busy and forgot to text you back. Will get you pictures in the morning. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.