check me please

[botoepfer]

I am getting ready to take my front clip of the 1963 AS I recall I have two core support chassis mount, Four bolts at the hood hinge to the fire wall , two at the inner fender in the motor compartment and two at the lower rear fender,, am I missing anything? Thanks

[The Rocknrod]

That's it. Assuming you've removed the hood. Heavy Bastidge.

[botoepfer]

Thank you Our weather sucks and I want to get this done before my gift helo shows u for the X member swap

[Chevy Fleetside]

Don't forget the ones outside next to the top by the door. You have to take the side cowl covers off.
Also. Don't know if you know but the later model control arms will bolt on to the early cross member. Only 63 and up and only C 10. Nothing wrong with swapping the whole cross member though. The later model ones had bigger sized U bolt for the lower control arms.

[botoepfer]

thanks

[The Rocknrod]

Originally Posted by Chevy Fleetside

Don't forget the ones outside next to the top by the door. You have to take the side cowl covers off.
Also. Don't know if you know but the later model control arms will bolt on to the early cross member. Only 63 and up and only C 10. Nothing wrong with swapping the whole cross member though. The later model ones had bigger sized U bolt for the lower control arms.

Yep, forgot those: