"292" 4.8L motor mount pictures for K-series - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1967KaiserM715 · 03-01-2019, 10:56 AM

Hi all, looking for pictures of the motor mounts and cross-members for '73-'87 K-series trucks with the 292 Inline Six.

I am trying to figure out the correct brackets to use, or if I need a new cross-member.

I originally thought I needed the clam-shells that curved back under the fuel pump, like those used in P-chassis vans, but now not so sure...

Any help is greatly appreciated.

1967KaiserM715 · 03-05-2019, 05:32 PM

Still want info or pictures, I found this thread, http://67-72chevytrucks.com/vboard/s...d.php?t=651304 , I originally thought I needed the brackets in Posts 15-17, but now not sure... looks like cross member or frame tower is different for 4x4?

I cant find any info for 73-87 trucks, only 72 and down.

Jmoney01 · 03-09-2019, 08:52 AM

I have a 1980 c30 with a 292. What pics do you need and I can take them

1967KaiserM715 · 03-09-2019, 01:10 PM

Quote:

Originally Posted by Jmoney01

I have a 1980 c30 with a 292. What pics do you need and I can take them

I can find 292 2-wheel drive trucks all the time; what I need is 4x4 trucks, they are out there, but they've been difficult to find.

Thanks though.

D13 · 03-15-2019, 06:24 AM

Bump because I too am curious. I'm looking at 250/700R4/208 combo starting with a stripped K2 frame.

1967KaiserM715 · 03-15-2019, 08:27 AM

Quote:

Originally Posted by D13

Bump because I too am curious. I'm looking at 250/700R4/208 combo starting with a stripped K2 frame.

Your 250 will mount where a small block v8 would, the motor mounts are not offset like a 292.

**hatzie** · 03-15-2019, 08:13 AM

Maybe a dumb question but... Are the 250 & 292 mounts different?

1967KaiserM715 · 03-15-2019, 08:26 AM

Quote:

Originally Posted by hatzie

Maybe a dumb question but... Are the 250 & 292 mounts different?

Yes 250 and 292 mounts are different, a 250 has the passenger motor mount behind the fuel pump, directly opposite the drivers mount. A 250 can be identified by the short 4" side covers, and that the motor mount sits behind the fuel pump.

A 292 has offset motor mounts, the passenger side mount is between the fuel pump and distributor. It also has 6" tall side covers.

D13 · 03-15-2019, 09:35 AM

I'm the lucky one! Still would be interested in the 292 picture as one can always hope to upgrade....

03-01-2019, 10:56 AM	#1
1967KaiserM715 Registered User Join Date: Feb 2019 Location: Troy NH Posts: 91	"292" 4.8L motor mount pictures for K-series Hi all, looking for pictures of the motor mounts and cross-members for '73-'87 K-series trucks with the 292 Inline Six. I am trying to figure out the correct brackets to use, or if I need a new cross-member. I originally thought I needed the clam-shells that curved back under the fuel pump, like those used in P-chassis vans, but now not so sure... Any help is greatly appreciated.

03-05-2019, 05:32 PM	#2
1967KaiserM715 Registered User Join Date: Feb 2019 Location: Troy NH Posts: 91	Re: "292" 4.8L motor mount pictures for K-series Still want info or pictures, I found this thread, http://67-72chevytrucks.com/vboard/s...d.php?t=651304 , I originally thought I needed the brackets in Posts 15-17, but now not sure... looks like cross member or frame tower is different for 4x4? I cant find any info for 73-87 trucks, only 72 and down.

03-09-2019, 08:52 AM	#3
Jmoney01 Registered User Join Date: Dec 2018 Location: Borden Posts: 97	Re: "292" 4.8L motor mount pictures for K-series I have a 1980 c30 with a 292. What pics do you need and I can take them

03-15-2019, 06:24 AM	#5
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: "292" 4.8L motor mount pictures for K-series Bump because I too am curious. I'm looking at 250/700R4/208 combo starting with a stripped K2 frame. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

03-15-2019, 08:13 AM	#7
hatzie Moderator Join Date: Oct 2008 Location: Wentworth, NH Posts: 4,977	Re: "292" 4.8L motor mount pictures for K-series Maybe a dumb question but... Are the 250 & 292 mounts different? __________________ 1959 M35A2 LDT465-1D SOLD 1967 Dodge W200 B383, NP420/NP201 SOLD 1969 Dodge Polara 500 B383, A833 SOLD 1972 Ford F250 FE390, NP435/NP205 SOLD 1976 Chevy K20, 6.5L, NV4500/NP208 SOLD 1986 M1008 CUCV SOLD 2000 GMC C2500, TD6.5L, NV4500 2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263 2009 Impala SS LS4 V8 RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials... 1973-1991 GM Light Truck Service, Unit/Overhaul, Wiring Manuals, Parts Books and Some 1968-1999 GM Service Training textbooks in PDF 1988-1998 GMT400 CK service manual project 1988-1993 GMT400 CK parts books. 1967-1972 GM Light, Medium, & Heavy Truck Service Manuals in PDF Please include at least the year and model in your threads. It'll be easier to answer your questions. And please let us know if and how your repairs were successful.

03-15-2019, 09:35 AM	#9
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: "292" 4.8L motor mount pictures for K-series I'm the lucky one! Still would be interested in the 292 picture as one can always hope to upgrade.... __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.