Missing plastic clip on ecu - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aruss99 · 03-12-2019, 04:02 PM

Trying to trouble shoot an injector issue and was wondering if not having one of the plastic clips that goes on the end of the wiring harness into the ecu could be causing problems.

Wildkarde · 03-12-2019, 11:20 PM

If you are talking about one of the color coded peices that hold the terminals in place. I could see that causing an issue if one of the terminals is not engaging properly, or being pushed back out of the connector body.

03-12-2019, 04:02 PM	#1
aruss99 Registered User Join Date: Feb 2015 Location: Phoenix Arizona Posts: 122	Missing plastic clip on ecu Trying to trouble shoot an injector issue and was wondering if not having one of the plastic clips that goes on the end of the wiring harness into the ecu could be causing problems.

03-12-2019, 11:20 PM	#2
Wildkarde Registered User Join Date: Mar 2018 Location: Ardmore Posts: 100	Re: Missing plastic clip on ecu If you are talking about one of the color coded peices that hold the terminals in place. I could see that causing an issue if one of the terminals is not engaging properly, or being pushed back out of the connector body.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.