|
|
|
03-24-2019, 02:31 PM
|
#1 |
|
Registered User
Join Date: Feb 2019
Location: Water Valley, Alberta, Canada
Posts: 0
|
Electrical problem
Hello,
I'm restoring a 72 GMC 2500. I installed all new original wiring. When I turn on the headlights it kills the turn signals and vise versa. I thought it was a ground problem so I cleaned all ground contacts and re-installed with no success. I installed a new light switch and still no change. Does anyone out there have any suggestions? Thanks |
|
|
|
04-04-2019, 12:09 AM
|
#2 |
|
Senior Member
 
Join Date: Dec 2018
Location: yamhill OR
Posts: 910
|
Re: Electrical problem
Welcome to the forum!
I'm not well versed in the 67-72 trucks to well but if you ask your question in the 67-72 section on this forum I'm sure someone can help you.
__________________
1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1978 chevy c20 350 4speed 1998 chevy c1500 4.3L 5speed 2002 Chevy s10 4.3L auto 4x4 Plus a Mercury & some Fords... To many projects! |
|
|
|
|
04-21-2019, 07:50 PM
|
#3 |
|
Registered User
Join Date: Apr 2019
Location: New Boston, Tx
Posts: 198
|
Re: Electrical problem
Where did the new wiring come from? What brand name?
|
|
|
|
|
04-21-2019, 08:50 PM
|
#4 |
|
Registered User
Join Date: Feb 2019
Location: Water Valley, Alberta, Canada
Posts: 0
|
Re: Electrical problem
Bought it in Canada, from a local supplier, was OEM. Figured out the problem, I installed LED lights and with no resistance the original wiring thought the tail lights were burnt out. I installed some inline resistor's and everything is good. Thanks
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
