CA 1965 cab for patches

[tchevs]

Getting ready to cut this cab. Bad corners, rockers, floors and inside roof near the center. Nice pillars, roof, very nice firewall. I’ll take $100 for bare cab minus the vin tag. Or I will cut what anyone needs.

[Inkfamous-13]

might be interested did this have à/c? cuz I need the heater core piece that has the extra flap for a/c. how's the drip rails? I have a truck that had a 70s douche bag pop up Sun roof in it. was going to install power sunroof but if I can get big window and roof all in one piece with interior skin with grooves I'll do that. how far from Palmdale Lancaster are you?

[tchevs]

Originally Posted by Inkfamous-13

might be interested did this have à/c? cuz I need the heater core piece that has the extra flap for a/c. how's the drip rails? I have a truck that had a 70s douche bag pop up Sun roof in it. was going to install power sunroof but if I can get big window and roof all in one piece with interior skin with grooves I'll do that. how far from Palmdale Lancaster are you?

It’s not an AC cab, drip rails are good. I’m about 4-5 hours north.

[Inkfamous-13]

ok I was just asking because I noticed there was the heater core box on the firewall but anyway so it's a hundred bucks for the bear cab you don't happen to have the big back window D for it that you'd sell separate trying to figure out how I go about getting a way to get up there to get it I'm trying to think if I could rent a trailer or at storage unit we have they have trailers for used to so might be able to get something from them just have to come up there what what major city are you in are near

[Inkfamous-13]

Oh sorry I was thinking it was a big a big back window. Be the only way I want to switch it back to the factory roof unless you'd be willing to cut the roof off and send it to me if you want to see how much the to do that would be zip code is 93535 and you pay a hundred for the roof I need the In-N-Out side so just cut it off on all four posts you know below the drip rails

[tchevs]

Originally Posted by Inkfamous-13

Oh sorry I was thinking it was a big a big back window. Be the only way I want to switch it back to the factory roof unless you'd be willing to cut the roof off and send it to me if you want to see how much the to do that would be zip code is 93535 and you pay a hundred for the roof I need the In-N-Out side so just cut it off on all four posts you know below the drip rails

I don’t want to ship big parts. If you figure out the shipping and pay for that up front, I can taken it where ever to have it shipped to you.