NC Need Dana 60 Rear Shafts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Seanext** · 06-23-2019, 09:49 PM

I need both axle shaft for a Dana 60 from a 1971 C20. The GM part number is 2403694 Dana part number is 31494-1. These are 34.75 long 30 spline 8 lug axles.

**w314speed** · 06-24-2019, 05:39 AM

Quote:

Originally Posted by Seanext

I need both axle shaft for a Dana 60 from a 1971 C20. The GM part number is 2403694 Dana part number is 31494-1. These are 34.75 long 30 spline 8 lug axles.

I have two sets available, as I have the Dana C20 and Dana K20 housings, posi's and ring gears. I'll get back to you. Thanks, Dan

**Seanext** · 06-24-2019, 10:46 AM

Thanks just let me know

**special-K** · 06-25-2019, 10:00 AM

Hey Dan, is the K2500 rear complete and in working order? Mine is needing work, so exploring options. My needs come after Seanext, of course.

**w314speed** · 06-25-2019, 11:55 AM

Quote:

Originally Posted by special-K

Hey Dan, is the K2500 rear complete and in working order? Mine is needing work, so exploring options. My needs come after Seanext, of course.

I don't have anything complete. The K20 housing and Dana 60 housings would need to be acid dipped but are good. I have some gears and posi cases. I have a very nice Dana 44 front housing and shafts. Sorry, not much help.

**special-K** · 06-27-2019, 10:38 PM

Quote:

Originally Posted by w314speed

I don't have anything complete. The K20 housing and Dana 60 housings would need to be acid dipped but are good. I have some gears and posi cases. I have a very nice Dana 44 front housing and shafts. Sorry, not much help.

Still could be helpful. I need to get the truck to my friends to use his lift. But once inside I may find an issue in my carrier, which is also a posi. I may be sending a PM in the not to distant future.

**SmirchIs#1** · 06-25-2019, 10:18 AM

Quote:

Originally Posted by Seanext

I need both axle shaft for a Dana 60 from a 1971 C20. The GM part number is 2403694 Dana part number is 31494-1. These are 34.75 long 30 spline 8 lug axles.

I have these axles in a complete rear.What are you wanting to pay or feel they are worth to you,before I pull them?I have several of these trucks in upstate NY

**w314speed** · 06-25-2019, 11:42 AM

This is a very nice pair of axles for 71-72 C20 Dana 60. $125 plus shipping and Paypal fees.

I have other gears and posi case for the Dana 60.

**w314speed** · 06-25-2019, 11:44 AM

More pics!

**Seanext** · 06-25-2019, 11:05 PM

w314speed can you check on the shipping to 28034. If shipping is not crazy I will take them.

**w314speed** · 06-26-2019, 05:37 PM

Quote:

Originally Posted by Seanext

w314speed can you check on the shipping to 28034. If shipping is not crazy I will take them.

Shipping USPS ground $30.90, insurance $2.45 and Paypal fee $5.54 Total $163.89. I can ship tomorrow. LMK! Thanks, Dan

Paypal dpkratz@bellsouth.net

**Seanext** · 06-25-2019, 11:07 PM

Hey SmirchIs#1 I think shipping would be cheaper from Atlanta so let me check and we will see how it works out.

Thanks

**SmirchIs#1** · 06-26-2019, 09:24 AM

Quote:

Originally Posted by Seanext

Hey SmirchIs#1 I think shipping would be cheaper from Atlanta so let me check and we will see how it works out.

Thanks

I don't blame you a bit.good luck

**Seanext** · 06-26-2019, 07:22 PM

That will work you should have 165.00 via PayPal. I like round numbers. Lol
If you could get them shipped tomorrow that would be great.
Thanks

**w314speed** · 06-26-2019, 08:51 PM

Quote:

Originally Posted by Seanext

That will work you should have 165.00 via PayPal. I like round numbers. Lol
If you could get them shipped tomorrow that would be great.
Thanks

Got It! Wrapped and ready for PO to open in AM. Will send tracking info. Thanks, Dan

**w314speed** · 06-27-2019, 09:01 AM

Quote:

Originally Posted by w314speed

Got It! Wrapped and ready for PO to open in AM. Will send tracking info. Thanks, Dan

PM sent with tracking info! Thanks, Dan

06-24-2019, 10:46 AM	#3
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 585	Re: Need Dana 60 Rear Shafts Thanks just let me know

06-25-2019, 10:00 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need Dana 60 Rear Shafts Hey Dan, is the K2500 rear complete and in working order? Mine is needing work, so exploring options. My needs come after Seanext, of course. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-25-2019, 11:42 AM	#8
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,317	Re: Need Dana 60 Rear Shafts This is a very nice pair of axles for 71-72 C20 Dana 60. $125 plus shipping and Paypal fees. I have other gears and posi case for the Dana 60. Attached Images

06-25-2019, 11:44 AM	#9
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,317	Re: Need Dana 60 Rear Shafts More pics! Attached Images

06-25-2019, 11:05 PM	#10
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 585	Re: Need Dana 60 Rear Shafts w314speed can you check on the shipping to 28034. If shipping is not crazy I will take them.

06-23-2019, 09:49 PM	#1
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 585	Need Dana 60 Rear Shafts I need both axle shaft for a Dana 60 from a 1971 C20. The GM part number is 2403694 Dana part number is 31494-1. These are 34.75 long 30 spline 8 lug axles.

06-25-2019, 11:07 PM	#12
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 585	Re: Need Dana 60 Rear Shafts Hey SmirchIs#1 I think shipping would be cheaper from Atlanta so let me check and we will see how it works out. Thanks

06-26-2019, 07:22 PM	#14
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 585	Re: Need Dana 60 Rear Shafts That will work you should have 165.00 via PayPal. I like round numbers. Lol If you could get them shipped tomorrow that would be great. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.