PA Rippens believe it or not another 72 blazer 3ott part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 09-06-2019, 06:22 PM

Seats weren't originals

Sunvisor brackets no visors but does have all mounting hardware 100 shipped SOLD

Single wall top decent shape with brackets but no top strips (sold already)and a destroyed hatch. The only part on the hatch is the soft ray glass. Top has soft ray also but I suspect drivers side is double wall glass. The single wall gasket was inside and matches the passenger side. Drivers side gasket doesn't fit snug its lose on the top. The one corner has a chip and 2 small cracks by the rear glass. SOLD

72 307 engine C10/20 complete with accessories fan and spacer are there just not pictured. Manifolds are 4x4, 2 barrel carb. 400 plus shipping through Fastenal. SOLD

3 speed with all associated parts 150 plus shippingTRANNY AND TRANFER SOLD EVERYTHING ELSE STILL AVAILABLE
Steering column, bell housing, tranny, transfer, crossmember any everything else. It has a 3 speed on the floor conversion so so no column to tranny rods.

Randy500 gets first chance at the seat channel once I cut it out.

**1rippen6** · 09-06-2019, 06:38 PM

Pics

NJKelly · 09-06-2019, 08:02 PM

Quote:

Originally Posted by 1rippen6

Pics

Hey Dwayne, how much for the driver side fender? Did it have an inside spare tire carrier? Interested in the passenger side fender as well if in decent shape, no rust through but surface rust okay if metal underneath is solid

NJKelly · 09-06-2019, 08:05 PM

Quote:

Originally Posted by 1rippen6

Pics

Grill also if good

**1rippen6** · 09-06-2019, 08:15 PM

Quote:

Originally Posted by NJKelly

Grill also if good

I'm in partners with my brother in law on this one and he posted the whole front end on a Facebook group so I'll see what happens there. Passengers side fender has holes. I'm going to try and remove the fender pictures in this thread.

NJKelly · 09-06-2019, 09:00 PM

Quote:

Originally Posted by 1rippen6

I'm in partners with my brother in law on this one and he posted the whole front end on a Facebook group so I'll see what happens there. Passengers side fender has holes. I'm going to try and remove the fender pictures in this thread.

Ok, thanks

**Eagle9502** · 09-06-2019, 08:17 PM

4x4 dipstick & tube?

**1rippen6** · 09-06-2019, 08:25 PM

Quote:

Originally Posted by Eagle9502

4x4 dipstick & tube?

Not sure, I didn't look but if it is it will go with the engine.

**Eagle9502** · 09-07-2019, 09:13 PM

Quote:

Originally Posted by 1rippen6

Not sure, I didn't look but if it is it will go with the engine.

Please let me know, thanks

**1rippen6** · 09-08-2019, 04:41 PM

Quote:

Originally Posted by Eagle9502

4x4 dipstick & tube?

Looks like the 4x4 dipstick to me

**tmontg01** · 09-06-2019, 10:50 PM

Gas pedal assembly?

**1rippen6** · 09-07-2019, 07:54 AM

Quote:

Originally Posted by tmontg01

Gas pedal assembly?

It's there, are you interested in the cable also or just the pedal. I'll get it pulled this weekend and get some pictures.

**tmontg01** · 09-07-2019, 11:01 AM

Quote:

Originally Posted by 1rippen6

It's there, are you interested in the cable also or just the pedal. I'll get it pulled this weekend and get some pictures.

I will take that with the throttle cable as well please, PM me your PayPal and total with the cable as well. Thank you! If there happens to be the center speaker with brackets it’d take that too.

**1rippen6** · 09-07-2019, 04:08 PM

Quote:

Originally Posted by tmontg01

I will take that with the throttle cable as well please, PM me your PayPal and total with the cable as well. Thank you! If there happens to be the center speaker with brackets it’d take that too.

The cable is longer than it should be but I should have an original. Do you need a 2 barrel or 4 barrel cable or are they the same. I grab a picture tomorrow morning.

**tmontg01** · 09-07-2019, 06:47 PM

Quote:

Originally Posted by 1rippen6

The cable is longer than it should be but I should have an original. Do you need a 2 barrel or 4 barrel cable or are they the same. I grab a picture tomorrow morning.

Okay sounds good, if there's a difference i'll take the 4 barrel cable.

**1rippen6** · 09-08-2019, 04:24 PM

Quote:

Originally Posted by tmontg01

I will take that with the throttle cable as well please, PM me your PayPal and total with the cable as well. Thank you! If there happens to be the center speaker with brackets it’d take that too.

No speaker, here is a correct cable 60 shipped for everything I'll pm info.

**1rippen6** · 09-07-2019, 09:39 AM

Quote:

Originally Posted by tmontg01

Gas pedal assembly?

45 shipped if interested

**DeadheadNM** · 09-06-2019, 11:37 PM

Any decent frame clips clamps for tubes and harness I’d be interested in Dwayne. Thanks.

09-06-2019, 11:39 PM

Pm sent!

**1rippen6** · 09-07-2019, 07:54 AM

Quote:

Originally Posted by DeadheadNM

Any decent frame clips clamps for tubes and harness I’d be interested in Dwayne. Thanks.

I'll check them out.

Quote:

Originally Posted by Martyt

Pm sent!

Replied

**1rippen6** · 09-08-2019, 05:06 PM

Quote:

Originally Posted by Martyt

Pm sent!

Only good part on the quarters are the taillight areas.

**richard2717** · 09-07-2019, 08:19 AM

how much for the soft ray hatch glass if you will separate from the top? you going down to VA anymore this season?

**1rippen6** · 09-07-2019, 08:43 AM

Quote:

Originally Posted by richard2717

how much for the soft ray hatch glass if you will separate from the top? you going down to VA anymore this season?

Sorry, I don't want to separate at this time. I have 2 more trips planned for this year.

**1rippen6** · 09-07-2019, 09:31 AM

More top pictures

**1rippen6** · 09-07-2019, 09:33 AM

More

09-06-2019, 06:22 PM	#1
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Rippens believe it or not another 72 blazer 3ott part out Seats weren't originals Sunvisor brackets no visors but does have all mounting hardware 100 shipped SOLD Single wall top decent shape with brackets but no top strips (sold already)and a destroyed hatch. The only part on the hatch is the soft ray glass. Top has soft ray also but I suspect drivers side is double wall glass. The single wall gasket was inside and matches the passenger side. Drivers side gasket doesn't fit snug its lose on the top. The one corner has a chip and 2 small cracks by the rear glass. SOLD 72 307 engine C10/20 complete with accessories fan and spacer are there just not pictured. Manifolds are 4x4, 2 barrel carb. 400 plus shipping through Fastenal. SOLD 3 speed with all associated parts 150 plus shippingTRANNY AND TRANFER SOLD EVERYTHING ELSE STILL AVAILABLE Steering column, bell housing, tranny, transfer, crossmember any everything else. It has a 3 speed on the floor conversion so so no column to tranny rods. Randy500 gets first chance at the seat channel once I cut it out. Attached Images Last edited by 1rippen6; 10-01-2019 at 05:07 PM.

09-06-2019, 06:38 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Rippens believe it or not another 72 blazer 3ott part out Pics Attached Images Last edited by 1rippen6; 09-06-2019 at 08:15 PM.

09-06-2019, 08:17 PM	#7
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 838	Re: Rippens believe it or not another 72 blazer 3ott part out 4x4 dipstick & tube?

09-06-2019, 10:50 PM	#11
tmontg01 Senior Member Join Date: May 2015 Location: Sierra Vista, Arizona Posts: 398	Re: Rippens believe it or not another 72 blazer 3ott part out Gas pedal assembly? __________________ 1968 C10 SWB 400SBC with VN327 20's 1972 K5 Blazer 383SBC 2011 Cadillac CTSV

09-06-2019, 11:37 PM	#18
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,447	Re: Rippens believe it or not another 72 blazer 3ott part out Any decent frame clips clamps for tubes and harness I’d be interested in Dwayne. Thanks. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-06-2019, 11:39 PM	#19
Martyt Guest Posts: n/a	Re: Rippens believe it or not another 72 blazer 3ott part out Pm sent!

09-07-2019, 08:19 AM	#22
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	Re: Rippens believe it or not another 72 blazer 3ott part out how much for the soft ray hatch glass if you will separate from the top? you going down to VA anymore this season? __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

09-07-2019, 09:31 AM	#24
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Rippens believe it or not another 72 blazer 3ott part out More top pictures Attached Images

09-07-2019, 09:33 AM	#25
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Rippens believe it or not another 72 blazer 3ott part out More Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.