HydroBoost Plumbing Diagram Help

[Worldofhurts]

Hello everyone, I have my hydro boost installed and I am getting ready to plumb all the hoses. I converted my 67 to power steering and the LS is out of a 2005 Silverado. I noticed the power steering pump has 2 barb connections and the high pressure fitting on the back of the pump. All the diagrams I came across showed only 1 barb return fitting on the pump. I found another diagram and modified it to what I have and would like input to make sure I am plumbing it up right. Thank you in advance for the help.

[clay68c10]

That will work, it is the way those systems are plumbed from the factory.

[Worldofhurts]

Thank you, It's my first swap so it's all new to me. I appreciate the help.

[mongocanfly]

yep...that's right...but I may may offer some advise is to get a small finned inline cooler for the return line...itll help keep the fluid temps down
I run mine between the steering box and reservoir...
heres what I'm using...https://www.summitracing.com/parts/rnb-918-319

[kipps]

mongocanfly, do you recommend installing a cooler only on the steering return? Or is there much point teeing both returns together and running both through the cooler?

[mongocanfly]

mine came factory only coming off the steering box....im not sure how much fluid runs thru the return line from the hydro...I think one off the steering box is good enough

[v30crewcab]

no cooler on the hydro return. it will cause problems.

[mongocanfly]

Cooler is on return from steering box...not the hydroboost return