Lowering advice... Also let’s see some examples - The 1947 - Present Chevrolet & GMC Truck Message Board Network

J Williams · 01-10-2020, 07:08 PM

Okay, I know there is other threads out there but I can’t seem to find a 2-1/2 front 3 rear drop. I am thinking about the front spindle 2-1/2” drop with 3” spring drop in the rear.

Also with dropping the rear... how far can you go without adjusting pinion angle? I haven’t heard of anyone talking about adjusting the pinion angle but in my head it only makes sense... not that my head makes much sense!
Posted via Mobile Device

**The Rocknrod** · 01-10-2020, 08:22 PM

Static Drops - http://67-72chevytrucks.com/vboard/s...d.php?t=328048

01-10-2020, 07:08 PM	#1
J Williams Registered User Join Date: Jun 2014 Location: Paul idaho Posts: 263	Lowering advice... Also let’s see some examples Okay, I know there is other threads out there but I can’t seem to find a 2-1/2 front 3 rear drop. I am thinking about the front spindle 2-1/2” drop with 3” spring drop in the rear. Also with dropping the rear... how far can you go without adjusting pinion angle? I haven’t heard of anyone talking about adjusting the pinion angle but in my head it only makes sense... not that my head makes much sense! Posted via Mobile Device

01-10-2020, 08:22 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Lowering advice... Also let’s see some examples Static Drops - http://67-72chevytrucks.com/vboard/s...d.php?t=328048 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.