6.0 in 66 with the a.c.? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rustyrodknocker · 04-06-2020, 03:24 PM

I'm getting ready to swap my motor in but I would like to keep the a.c on it.
What is needed to make it functional in the truck? I have the complete donor vehicle. But I have nothing else.

**mongocanfly** · 04-06-2020, 04:09 PM

Not sure how much room you have in a 66, but most others switch to a high mount ac...

rustyrodknocker · 04-06-2020, 04:44 PM

That's something I have not considered. The room is comparable to trucks up until the late 80's

**nsb29** · 04-07-2020, 05:31 PM

I Don’t have enough room between the compressor and the motor mount my motor is out of a G8 same as Camaro but my brother’s is out of a truck and he had room If that helps

Rich84 · 04-08-2020, 02:45 PM

With slider mounts you can slide the motor forward enough to have room for the compressor. Mine are an '84 and an '86. I don't know how that translates to a '66.

rustyrodknocker · 04-12-2020, 08:05 PM

Sounds like I may be ok. This is as truck drivetrain. I'm starting to think the a.c. is going to be the hardest part of the swap.

04-06-2020, 03:24 PM	#1
rustyrodknocker Registered User Join Date: Dec 2010 Location: salem oregon Posts: 414	6.0 in 66 with the a.c.? I'm getting ready to swap my motor in but I would like to keep the a.c on it. What is needed to make it functional in the truck? I have the complete donor vehicle. But I have nothing else.

04-06-2020, 04:09 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,671	Re: 6.0 in 66 with the a.c.? Not sure how much room you have in a 66, but most others switch to a high mount ac... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-06-2020, 04:44 PM	#3
rustyrodknocker Registered User Join Date: Dec 2010 Location: salem oregon Posts: 414	Re: 6.0 in 66 with the a.c.? That's something I have not considered. The room is comparable to trucks up until the late 80's

04-07-2020, 05:31 PM	#4
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: 6.0 in 66 with the a.c.? I Don’t have enough room between the compressor and the motor mount my motor is out of a G8 same as Camaro but my brother’s is out of a truck and he had room If that helps __________________ Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent Last edited by nsb29; 04-08-2020 at 04:18 PM.

04-08-2020, 02:45 PM	#5
Rich84 Registered User Join Date: Mar 2012 Location: Woodbury, Ct. Posts: 1,693	Re: 6.0 in 66 with the a.c.? With slider mounts you can slide the motor forward enough to have room for the compressor. Mine are an '84 and an '86. I don't know how that translates to a '66.

04-12-2020, 08:05 PM	#6
rustyrodknocker Registered User Join Date: Dec 2010 Location: salem oregon Posts: 414	Re: 6.0 in 66 with the a.c.? Sounds like I may be ok. This is as truck drivetrain. I'm starting to think the a.c. is going to be the hardest part of the swap.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.