Sbc 406 FOR SALE 0 miles!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phantom dually · 12-12-2003, 12:00 AM

I am in the process of building a SBC 406 engine. It has a stock crank that has been turned .010 under to clean up. Stock 5.565 rods. Block has been checked for cracks and lined hone and hot tanked. Has new Main Rod and cam bearings. All bearings in engine are new. Heads are 882 castings and have been checked as well and fitted with new valve seats locks and springs. Cam is a hydraulic unit from comp XE262 series. New double roller timing chain and oil pump. Pistons are also new flat top units by Keith Black and are hyperutectics. Comp ratio is 10:1. Engine Hp estimate according to DD is around 350hp and 445 ft lb. torque. Block can be painted color of your choice if you put a deposit down before it is finished. Comes with a Edelbrock intake that has been bead blasted and cleaned. All gaskets are felpro. Engine will have new chrome pan, chrome timing chain cover, and chrome valve covers. $1500 or I can ship via truck. There are a few carriers around here. Shipping will be based on your zip and im sure it may have to go to a dock?? If you need to, call me at 502-376-9408. Engine will be done and ready by DEC 20th. Block is a 2 bolt main.

phantom dually · 12-13-2003, 01:34 PM

LOWER PRICE!!

Russell · 12-13-2003, 01:55 PM

Why are you sellin it? Isn't it for your truck?

phantom dually · 12-13-2003, 06:17 PM

I have another 406 that is for my truck. I like to buy motors and build them for fun and then sell them to make a small profit. Just a hobby!!

Russell · 12-13-2003, 06:25 PM

What a sweet hobby! I gotta get into something like that!

phantom dually · 12-14-2003, 09:08 PM

TTT

phantom dually · 12-15-2003, 12:22 AM

BUY ME!!!!!!!:p

MylilBowTie · 12-15-2003, 07:20 AM

If I had the money It would be sold

Tracy Focht · 12-15-2003, 07:04 PM

email me more about this...and empty your mailbox again...

phantom dually · 12-15-2003, 09:51 PM

That mail box gets full way to easy!!!

Tracy Focht · 12-16-2003, 08:32 PM

just tried to reply to your PM...shows your box is still full...you sure you are emptying it?

phantom dually · 12-16-2003, 11:12 PM

Emptied again!!!

Tracy Focht · 12-17-2003, 11:11 AM

Quote:

Originally posted by phantom dually
Emptied again!!!

nope...still not working...are you getting rid of all message tracking and messages sent????

70ChevyLongbed · 12-17-2003, 01:47 PM

Quote:

Originally posted by phantom dually
I have another 406 that is for my truck. I like to buy motors and build them for fun and then sell them to make a small profit. Just a hobby!!

I wanna do that too!!

The motor sounds sweet, but I won't be looking for a complete motor till later next year. TTT

phantom dually · 12-17-2003, 07:32 PM

I tried it again. Yeah forgot about the tracking!!

phantom dually · 12-19-2003, 11:40 PM

TTT

phantom dually · 12-21-2003, 02:10 AM

TTT

phantom dually · 12-21-2003, 05:37 PM

TTT

phantom dually · 12-22-2003, 08:55 PM

TTT

phantom dually · 12-23-2003, 07:26 PM

TTT

gchemist · 12-24-2003, 12:26 AM

Someone please buy it. I'm going nuts seeing it and being too far way.
I would drop the heads thought and go more aggressive on the cam.

phantom dually · 12-24-2003, 12:01 PM

Yeah what he said!! Somebody buy it!!

Tracy Focht · 12-24-2003, 03:17 PM

$800....

phantom dually · 12-24-2003, 05:15 PM

This motor is calling your name!!! BUY ME!! BUY ME!! $1500!

phantom dually · 12-25-2003, 02:50 PM

TTT

12-12-2003, 12:00 AM	#1
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Sbc 406 FOR SALE $1500 WILL SHIP!!! I am in the process of building a SBC 406 engine. It has a stock crank that has been turned .010 under to clean up. Stock 5.565 rods. Block has been checked for cracks and lined hone and hot tanked. Has new Main Rod and cam bearings. All bearings in engine are new. Heads are 882 castings and have been checked as well and fitted with new valve seats locks and springs. Cam is a hydraulic unit from comp XE262 series. New double roller timing chain and oil pump. Pistons are also new flat top units by Keith Black and are hyperutectics. Comp ratio is 10:1. Engine Hp estimate according to DD is around 350hp and 445 ft lb. torque. Block can be painted color of your choice if you put a deposit down before it is finished. Comes with a Edelbrock intake that has been bead blasted and cleaned. All gaskets are felpro. Engine will have new chrome pan, chrome timing chain cover, and chrome valve covers. $1500 or I can ship via truck. There are a few carriers around here. Shipping will be based on your zip and im sure it may have to go to a dock?? If you need to, call me at 502-376-9408. Engine will be done and ready by DEC 20th. Block is a 2 bolt main. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 01-08-2004 at 12:53 AM.

12-13-2003, 01:34 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	LOWER PRICE!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-13-2003, 01:55 PM	#3
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Why are you sellin it? Isn't it for your truck? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

12-13-2003, 06:17 PM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I have another 406 that is for my truck. I like to buy motors and build them for fun and then sell them to make a small profit. Just a hobby!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-13-2003, 06:25 PM	#5
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	What a sweet hobby! I gotta get into something like that! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

12-14-2003, 09:08 PM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-15-2003, 12:22 AM	#7
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	BUY ME!!!!!!!:p __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-15-2003, 07:20 AM	#8
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	If I had the money It would be sold __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

12-15-2003, 07:04 PM	#9
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	email me more about this...and empty your mailbox again...

12-15-2003, 09:51 PM	#10
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	That mail box gets full way to easy!!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-16-2003, 08:32 PM	#11
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	just tried to reply to your PM...shows your box is still full...you sure you are emptying it?

12-16-2003, 11:12 PM	#12
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Emptied again!!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-17-2003, 07:32 PM	#15
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I tried it again. Yeah forgot about the tracking!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-19-2003, 11:40 PM	#16
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-21-2003, 02:10 AM	#17
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448



Register or Log In To remove these advertisements.

12-21-2003, 05:37 PM	#18
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-22-2003, 08:55 PM	#19
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-23-2003, 07:26 PM	#20
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-24-2003, 12:26 AM	#21
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Someone please buy it. I'm going nuts seeing it and being too far way. I would drop the heads thought and go more aggressive on the cam. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

12-24-2003, 12:01 PM	#22
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Yeah what he said!! Somebody buy it!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 12-24-2003 at 05:14 PM.

12-24-2003, 03:17 PM	#23
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	$800....

12-24-2003, 05:15 PM	#24
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	This motor is calling your name!!! BUY ME!! BUY ME!! $1500! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

12-25-2003, 02:50 PM	#25
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.