How to ship HO52 third member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1966K20 · 01-31-2021, 05:50 PM

Does anyone have any experience shipping an HO52 third member? I’ve read online about people shipping third members in plastic bags surrounded by spray foam in 5 gallon buckets but not specifically an HO52 and didn’t know if it would fit. I also question if the bucket would be strong enough to not crack open. Also wonder what the weight is and which carrier would be best. I’m trying to figure this out from the receiving end. Any thoughts or other ideas greatly appreciated. Thanks.

**Steeveedee** · 01-31-2021, 06:37 PM

I shipped a radiator core support for a '69 Skylark in a reinforced card board box via Greyhound. They were pretty cheap, but it took awhile. The buyer wasn't in a hurry, so it worked out. I don't think that the punkin will fit in a 5 gallon bucket. If you make a solid wood sided crate and fill it with foam to surround the punkin, it should ship OK. The foam will keep the sides from caving in. Loaders tend to handle heavy stuff pretty badly, in my experience.

**mongocanfly** · 01-31-2021, 08:16 PM

I received some heavy oily items that were shipped in a heavy plastic bag inside one of those better plastic totes that wallymart sells..it was foamed around it... shipped thru Fastenal...on a small pallet

**1968k20** · 01-31-2021, 09:26 PM

I shipped a continental block via ups. I built a crate for it.

**vetnat** · 02-01-2021, 12:22 AM

I just purchased an HO32 third member that I had shipped to Canada. It was inside a plastic bag, inside a milk crate, inside a cardboard box the same size as the milk crate. The cardboard box had many layers of plastic wrap around it. The third member was padded inside the milk crate with carpet and and underlay scraps, and then all the padding was tied down to the milk crate with twine. Arrived in great shape! I will see if I can attach some pictures.

**vetnat** · 02-01-2021, 12:42 AM

Pictures

Bimus · 02-01-2021, 12:47 AM

I have shipped Heavy parts and I always build a solid crate some times to be moved with a fork lift or good cut outs for handles even bolting it to a pallet . I like vetnat post about the milk crate that is good way to protect what is being shipped .

**vetnat** · 02-01-2021, 08:28 PM

Opened up.

**Steeveedee** · 02-01-2021, 08:41 PM

^ That's an excellent way to ship it! The milk crate could take more abuse without breaking like wood would. I'll have to remember that.

1966K20 · 02-01-2021, 09:42 PM

Thanks for the ideas guys. Much appreciated.

**aotte1** · 02-03-2021, 01:06 AM

Also Wood crate.

01-31-2021, 05:50 PM	#1
1966K20 Registered User Join Date: Aug 2020 Location: Jefferson, Maine Posts: 2	How to ship HO52 third member Does anyone have any experience shipping an HO52 third member? I’ve read online about people shipping third members in plastic bags surrounded by spray foam in 5 gallon buckets but not specifically an HO52 and didn’t know if it would fit. I also question if the bucket would be strong enough to not crack open. Also wonder what the weight is and which carrier would be best. I’m trying to figure this out from the receiving end. Any thoughts or other ideas greatly appreciated. Thanks.

01-31-2021, 06:37 PM	#2
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,698	Re: How to ship HO52 third member I shipped a radiator core support for a '69 Skylark in a reinforced card board box via Greyhound. They were pretty cheap, but it took awhile. The buyer wasn't in a hurry, so it worked out. I don't think that the punkin will fit in a 5 gallon bucket. If you make a solid wood sided crate and fill it with foam to surround the punkin, it should ship OK. The foam will keep the sides from caving in. Loaders tend to handle heavy stuff pretty badly, in my experience. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

01-31-2021, 08:16 PM	#3
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,671	Re: How to ship HO52 third member I received some heavy oily items that were shipped in a heavy plastic bag inside one of those better plastic totes that wallymart sells..it was foamed around it... shipped thru Fastenal...on a small pallet __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

01-31-2021, 09:26 PM	#4
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: How to ship HO52 third member I shipped a continental block via ups. I built a crate for it. __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

02-01-2021, 12:22 AM	#5
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 511	Re: How to ship HO52 third member I just purchased an HO32 third member that I had shipped to Canada. It was inside a plastic bag, inside a milk crate, inside a cardboard box the same size as the milk crate. The cardboard box had many layers of plastic wrap around it. The third member was padded inside the milk crate with carpet and and underlay scraps, and then all the padding was tied down to the milk crate with twine. Arrived in great shape! I will see if I can attach some pictures. __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

02-01-2021, 12:42 AM	#6
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 511	Re: How to ship HO52 third member Pictures Attached Images __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

02-01-2021, 12:47 AM	#7
Bimus Registered User Join Date: Dec 2018 Location: Farmington NM Posts: 112	Re: How to ship HO52 third member I have shipped Heavy parts and I always build a solid crate some times to be moved with a fork lift or good cut outs for handles even bolting it to a pallet . I like vetnat post about the milk crate that is good way to protect what is being shipped .

02-01-2021, 08:28 PM	#8
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 511	Re: How to ship HO52 third member Opened up. Attached Images __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

02-01-2021, 08:41 PM	#9
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,698	Re: How to ship HO52 third member ^ That's an excellent way to ship it! The milk crate could take more abuse without breaking like wood would. I'll have to remember that. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

02-01-2021, 09:42 PM	#10
1966K20 Registered User Join Date: Aug 2020 Location: Jefferson, Maine Posts: 2	Re: How to ship HO52 third member Thanks for the ideas guys. Much appreciated.

02-03-2021, 01:06 AM	#11
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: How to ship HO52 third member Also Wood crate.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.